> I couldn't find anything like this in the settings, but I was wondering if
> it's possible to have a configuration such that when a 'break' fires and is
> completed, it automatically resets the mini-break timer.
A timer will automatically reset if you are idle for at least the 'break
duration' of that timer. If the restbreak has a larger break duration than the
microbreak, the microbreak will reset during the restbreak (because you are
idle during the restbreak).
Furthermore, If a restbreak is due withing (i think) 30 seconds after a
microbreak, Workrave will skip the microbreak and give a restbreak instead.
So you will not get a restbreak immediately after a microbreak.
> The situation is that assume I have a mini-break scheduled every 10
> minutes;if I have my 5 minute normal break done, I don't want a mini-break 1 or 2
> minutes after that. The "big" break should reset the "small" break so that its
> timer restarts when the big break is over, too.
How long are you microbreak? Normally your microbreak will reset during the 5
minute restbreak.
Groetjes,
Rob
|
