https://sourceforge.net/p/wltestpy/wiki/about/Recent changes to aboutenTue, 02 Jun 2015 09:43:57 -0000https://sourceforge.net/p/wltestpy/wiki/about/<div class="markdown_content"><pre>--- v2 +++ v3 @@ -2,7 +2,7 @@ # Hannes Rennau, Department of Radiation Therapy, University of Rostock # # script calculates shift of sphere relative to MLC leafes -# via reading dicom data +# via reading dicom data: Winston-Lutz Test # # x- and y-shift shift is calculated relative to beam direction # </pre> </div>Hannes RennauTue, 02 Jun 2015 09:43:57 -0000https://sourceforge.net1a96da87eeb6ee97997ee4cb46abba745091ccf6https://sourceforge.net/p/wltestpy/wiki/about/<div class="markdown_content"><pre>--- v1 +++ v2 @@ -1,4 +1,6 @@ #!/usr/bin/python +# Hannes Rennau, Department of Radiation Therapy, University of Rostock +# # script calculates shift of sphere relative to MLC leafes # via reading dicom data # </pre> </div>Hannes RennauTue, 02 Jun 2015 09:43:29 -0000https://sourceforge.netec4d1e4787bece654dbc398cb65c1cb23c96b033https://sourceforge.net/p/wltestpy/wiki/about/<div class="markdown_content"><h1 id="usrbinpython">!/usr/bin/python</h1> <h1 id="script-calculates-shift-of-sphere-relative-to-mlc-leafes">script calculates shift of sphere relative to MLC leafes</h1> <h1 id="via-reading-dicom-data">via reading dicom data</h1> <h1></h1> <h1 id="x-and-y-shift-shift-is-calculated-relative-to-beam-direction">x- and y-shift shift is calculated relative to beam direction</h1> <h1></h1> <h1 id="how-to-use-script">how to use script:</h1> <h1 id="run_all_dcm-foldername">./run_all_dcm $FOLDERNAME</h1> <h1 id="script-then-runs-over-all-dicom-files-found-in-folder-and">script then runs over all DICOM files found in folder and</h1> <h1 id="creates-png-images-with-xy-shift-values-and">creates .png images with x,y shift values and</h1> <h1 id="writes-ascii-file-in-following-formateg">writes ASCII file in following format,e.g.:</h1> <h1 id="sequence1-x_shifty_shift025mm015mm">SEQUENCE1: (x_shift,y_shift)=(0.25mm,0.15mm)</h1> <h1 id="sequence2-x_shifty_shift015mm013mm">SEQUENCE2: (x_shift,y_shift)=(0.15mm,0.13mm)</h1> <h1 id="_1">...</h1></div>Hannes RennauTue, 02 Jun 2015 09:41:55 -0000https://sourceforge.net839a0936d6b40b1e0549907601db502f2eb45468