I have two G4/400 TiBooks (OS10.2) and neither will work with the
driver. They seem to install just fine, the prefs pane is loaded, but
the card is not recognized. In Network settings, there is no EN1
port for PC card. The card works fine in OS9.
I tried to sudo kmodstat and the command was not recognized.
I ran the troubleshooting script and it came back with the
following:
BuildVersion: 6C115
Darwin TiBook.local. 6.0 Darwin Kernel Version 6.0: Sat Jul 27
13:18:52
PDT 2002; root:xnu/xnu-344.obj~1/RELEASE_PPC Power
Macintosh powerpc
ppc7400
### wireless driver files installed
drwxr-xr-x 3 root wheel 102 Jul 27 13:22
IOPCCardFamily.kext
### wirelesscard info
| | "VersionOneInfo" = ("Lucent
Technologies","WaveLAN/IEEE","V$
| | +-o pccard156,2@0,0 <class IOPCCard16Device>
| | "IOName" = "pccard156,2"
### network info
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu
16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en1: flags=8863<
UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST>
mtu 1500
inet6 fe80::230:65ff:fe1c:5f96%en1 prefixlen 64 scopeid 0x4
inet 10.0.1.34 netmask 0xffffff00 broadcast 10.0.1.255
ether 00:30:65:1c:5f:96
media: autoselect status: active
supported media: autoselect
en0: flags=8863<
UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST>
mtu 1500
inet6 fe80::230:65ff:fed6:1158%en0 prefixlen 64 scopeid
0x5
inet 192.168.3.3 netmask 0xffffff00 broadcast
192.168.3.255
ether 00:30:65:d6:11:58
media: autoselect (100baseTX <full-duplex>) status: active
supported media: none autoselect 10baseT/UTP <half-
duplex>
10baseT/UTP <half-duplex,hw-loopback> 10baseT/UTP <full-
duplex>
10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-
duplex> 100baseTX
<half-duplex,hw-loopback> 100baseTX <full-duplex> 100baseTX
<full-duplex,hw-loopback>
### wd command line tool status
/Users/tom/Desktop/Troubleshooting Info.command:
WirelessConfig:
command not found
logout
[Process completed]
Logged In: NO
Re-installed the Wireless Driver. No WirelessDriver System Prefs pane.
Tried to install the Prefs pane and Config packages separately. This
worked! (When I tried to install the Wireless Driver, it came back with an
error message Unable to Update.)
It seems as though the Wireless Driver gets installed, but something
goes wrong with the installation of the config package and Prefs pane.
It is now working fine and I will try it out on my other G4/400 Tibooks
tomorrow.