#14 All OK but fail to contacting PPP serv e

[Alessandro Saccardo]

All Ok, signal Ok, access point Dlink 1000Ap.

Via Etherne internal and cable all ok.

Via Wireless fail to contacting PPP server, not recognize.

Thank for support as soon possible.

Last login: Thu Oct 10 22:25:02 on ttyp1
/Users/alessand/Desktop/Troubleshooting\ Info.1.command; exit
Welcome to Darwin!
[Computer-di-Alessandro-Saccardo:~] alessand% /Users/
alessand/Desktop/Troubleshooting\ Info.1.command; exit

### system info

ProductName: Mac OS X
ProductVersion: 10.2.1
BuildVersion: 6D52
Darwin Computer-di-Alessandro-Saccardo.local. 6.1 Darwin Kernel
Version 6.1: Fri Sep 6 23:24:34 PDT 2002; root:xnu/xnu-
344.2.obj~2/RELEASE_PPC Power Macintosh powerpc
ppc7450

### wireless driver files installed

drwxr-xr-x 3 root wheel 102 Oct 10 20:58 WirelessDriver.kext
drwxr-xr-x 3 root wheel 102 Jul 27 22:22
IOPCCardFamily.kext
ls: /Library/PreferencePanes: No such file or directory

### wirelesscard info

| | | "VersionOneInfo" = ("Lucent
Technologies","WaveLAN/IEEE","V$
| | | "VersionOneInfo" = ("Lucent
Technologies","WaveLAN/IEEE")
| | +-o pccard156,2@0,0 <class IOPCCard16Device>
| | | "IOName" = "pccard156,2"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu
16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en2: flags=8863<
UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST>
mtu 1500
tunnel inet -->
inet6 fe80::202:2dff:fe1c:1b94%en2 prefixlen 64 scopeid 0x4
ether 00:02:2d:1c:1b:94
media: <unknown type> (DS11 <full-duplex>) status: active
supported media: none manual autoselect DS1 <half-
duplex> DS1 <full-duplex> DS2 <half-duplex> DS2 <full-duplex>
DS5 <half-duplex> DS5 <full-duplex> DS11 <half-duplex> DS11 <
full-duplex>
en0: flags=8863<
UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST>
mtu 1500
tunnel inet -->
inet6 fe80::203:93ff:fea5:85ea%en0 prefixlen 64 scopeid 0x5
ether 00:03:93:a5:85:ea
media: autoselect (10baseT/UTP <half-duplex>) status:
active
supported media: none autoselect 10baseT/UTP <half-
duplex> 10baseT/UTP <half-duplex,hw-loopback> 10baseT/UTP <
full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX
<half-duplex> 100baseTX <half-duplex,hw-loopback> 100baseTX
<full-duplex> 100baseTX <full-duplex,hw-loopback> 1000baseTX
<full-duplex> 1000baseTX <full-duplex,hw-loopback> 1000baseTX
<full-duplex,flow-control> 1000baseTX <full-duplex,flow-
control,hw-loopback>
en1: flags=8863<
UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST>
mtu 1500
inet6 fe80::230:65ff:fe1d:e67d%en1 prefixlen 64 scopeid 0x6
inet 169.254.91.214 netmask 0xffff0000 broadcast
169.254.255.255
ether 00:30:65:1d:e6:7d
media: autoselect status: active
supported media: autoselect
ppp0: flags=8011<UP,POINTOPOINT,MULTICAST> mtu 1500
inet 192.168.254.5 --> 10.112.112.112 netmask 0xffffff00
ppp1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST>
mtu 1492
inet 212.171.15.59 --> 192.168.100.1 netmask 0xffffff00

### wd command line tool status

/Users/alessand/Desktop/Troubleshooting Info.1.command:
WirelessConfig: command not found
logout
[Process completed]