wirelessdriver-support

[Wirelessdriver-support] [wirelessdriver - Help] RE: SkyLine and Lombard

[<no...@so...>]

Read and respond to this message at: 
http://sourceforge.net/forum/message.php?msg_id=495194
By: rob66778

OS X will use both interfaces at the same time, picking the one it thinks has
the lowest number of hops and/or lower latency...

If you're having trouble getting it to work over the wireless link, we can probably
help you with that.

How is your network configured?  Is encryption turn on?  Are there other networks
in range?

-Rob

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge and visit: 
http://sourceforge.net/forum/monitor.php?forum_id=107925

[Wirelessdriver-support] [wirelessdriver - Help] RE: SkyLine and Lombard

[<no...@so...>]

Read and respond to this message at: 
http://sourceforge.net/forum/message.php?msg_id=495207
By: kevinbg

No encryption. Works fine in 9.2. No other networks in range.

The network is a DSL with the Airport acting as a bridge to the network.

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge and visit: 
http://sourceforge.net/forum/monitor.php?forum_id=107925

[Wirelessdriver-support] [wirelessdriver - Help] RE: SkyLine and Lombard

[<no...@so...>]

Read and respond to this message at: 
http://sourceforge.net/forum/message.php?msg_id=658813
By: dtsteele

I have run the installer on my Powerbook Lombard running 10.1 with my Skyline
11Mb card. I am getting power to the card, a strong signal, and have both an
Airport and EN1 port in network preferences. Neither setting gets me on the
internet. I'm not clear if I use the same TCP/IP settings in 10.1 that I have
when I run under 9.2. I'm getting a conflict message regarding my TCP/IP setting
but don't know where to go next. I have everything running through IPNetRouter
as always including an Apple base station.

Any help appreciated.

Dale
dts...@ma...

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge and visit: 
http://sourceforge.net/forum/monitor.php?forum_id=107925