From: bill f <bil...@ya...> - 2006-05-04 22:04:38
|
Wireless Experts, I've just installed OS X - Tiger on my new/used Wallstreet (256K RAM) It works, and now I'm trying to get my Lucent Silver Wireless card set up correctly. I first discovered the IOXperts driver, downloaded and installed the driver/demo version and got it to work. The card is currently installed and working, with 30 minute demo driver. However, it costs $20, for the full version. I then discovered this free WirelessDriver. I have downloaded and installed it. That went OK, but I can't get it to work. In Preferences, Network, it shows Wireless (en1), but only once, I assume it's using the IOXperts driver and I can't find anyway to turn it off or remove it, unintall it. My guess is that I need to remove the older IOXperts driver before I can install/use the free WirelessDriver. If someone is willing to help; Do I need to remove the IOXperts driver? How do I do that? I ran the Wireless Config and Troubleshooting Script. That info is pasted below, if that's helpful. Thank you, Bill ------------------------------------- WIRELESS CONFIG Last login: Thu May 4 14:50:49 on ttyp1 /Volumes/WirelessDriver\ beta\ 5.1/Utilities/WirelessConfig; exit Welcome to Darwin! bills-powerbook1998:~ Bill$ /Volumes/WirelessDriver\ beta\ 5.1/Utilities/WirelessConfig; exit 2006-05-04 14:51:29.067 WirelessConfig[234] Iterations: 0 WirelessDriver: Couldn't find a WirelessDriver service in registry - is the card loaded? logout [Process completed] -------------- TROUBLESHOOTING SCRIPT Last login: Thu May 4 14:31:07 on console /Volumes/WirelessDriver\ beta\ 5.1/Utilities/Troubleshooting\ Info.command; exit Welcome to Darwin! bills-powerbook1998:~ Bill$ /Volumes/WirelessDriver\ beta\ 5.1/Utilities/Troubleshooting\ Info.command; exit ### system info ProductName: Mac OS X ProductVersion: 10.4.6 BuildVersion: 8I127 Darwin bills-powerbook1998.local 8.6.0 Darwin Kernel Version 8.6.0: Tue Mar 7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC Power Macintosh powerpc ppc750 ### wireless driver files installed drwxr-xr-x 3 root wheel 102 Mar 26 2005 IOPCCardFamily.kext ### wirelesscard info | | | | "VersionOneInfo" = ("Lucent Technologies","WaveLAN/IEEE","V$ | +-o pccard@13 <class IOPCIDevice, registered, matched, active, busy $ | | | "name" = <"pccard"> | | | "device_type" = <"pccard"> | | | +-o pccard156,2@0,0 <class IOPCCard16Device, registered, matched$ | | | | "IOName" = "pccard156,2" | | | | "IONameMatched" = "pccard156,2" | | | | "IONameMatch" = ("pccardb,7300","pccardb,7100","pccardb,7$ | +-o pccard@13,1 <class IOPCIDevice, registered, matched, active, bus$ | | "name" = <"pccard"> | | "device_type" = <"pccard"> ### network info lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 00:05:02:47:1c:9c media: autoselect (none) status: inactive supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX <full-duplex> en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::202:2dff:fe2b:4355%en1 prefixlen 64 scopeid 0x5 inet 192.168.1.201 netmask 0xffffff00 broadcast 192.168.1.255 ether 00:02:2d:2b:43:55 media: autoselect status: active supported media: autoselect ### wd command line tool status /Volumes/WirelessDriver beta 5.1/Utilities/Troubleshooting Info.command: line 33: WirelessConfig: command not found logout [Process completed] __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com |