[Wirelessdriver-support] no en1 port

[Mitzi Kirkland-I. <mki...@um...>]

Hi. Any ideas? I'd been using this driver for some time and it was 
glorious, and then switched out cards (was absent any card for a week 
or two; in that time we ran DiskWarrior, if that's relevant)-- switched 
from oh. . . I can't recall but the new one is Netgear MA401RA. Machine 
is a powerbook G4 running 10.2.8. The en2 and en3 (that's what we had) 
network port options are now greyed-out. I have uninstalled and 
reinstalled 112 times (build 5.1b) and made sure things are installed 
and where they should be. The preference pane seems to be 
auto-installed in /System/Library/Prefpanes but the troubleshooter 
looks for it in /Library/prefpanes; I've tried both and changed them to 
admin from wheel and now I have a copy in each spot in case (so now I 
two preference panes in prefs). The computer 'sees' the card-- I get 
the icon in the menu bar. I have deleted the kextcache and all that 
several times. I have pleaded with the Gods. Card family thing seems up 
to date (33 0 0x1c5b5000 0x2 1000 0x20000 
com.apple.iokit.IOPCCardFamily (1.4.0)) What next?

Here's the troubleshooting info.

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.8
BuildVersion:   6R73
Darwin Brandon-Ivess-Computer.local. 6.8 Darwin Kernel Version 6.8: Wed 
Sep 10 15:20:55 PDT 2003; root:xnu/xnu-344.49.obj~2/RELEASE_PPC  Power 
Macintosh powerpc
ppc7400

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 May 24 07:11 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 Sep 10  2003 IOPCCardFamily.kext
drwxr-xr-x   3 root    admin   102 May 24 07:11 WirelessDriver 
PPane.prefPane

### wirelesscard info

     | |             "VersionOneInfo" = ("NETGEAR MA401RA Wireless 
PC","Card","I$
     | |       +-o pccardb,7300@0,0  <class IOPCCard16Device>
     | |             "IOName" = "pccardb,7300"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::203:93ff:fe56:bd92%en0 prefixlen 64 scopeid 0x4
         ether 00:03:93:56:bd:92
         media: autoselect (none) status: inactive
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 
100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX 
<full-duplex,hw-loopback>

### wd command line tool status

/Users/monkey/Desktop/wireless fubar/Utilities/Troubleshooting 
Info.command: WirelessConfig: command not found
logout
[Process completed]

Thanks
M