[Wirelessdriver-support] Trouble setting up with Belkin F5D6020

[murray r. <mu...@sc...>]

Last login: Sat Feb 12 10:54:57 on console
/Volumes/WirelessDriver\ beta\ 5.1/Utilities/Troubleshooting\ 
Info.command; exit
Welcome to Darwin!
[murray:~] murray% /Volumes/WirelessDriver\ beta\ 
5.1/Utilities/Troubleshooting\ Info.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.8
BuildVersion:   6R73
Darwin murray.local. 6.8 Darwin Kernel Version 6.8: Wed Sep 10 15:20:55 
PDT 2003; root:xnu/xnu-344.49.obj~2/RELEASE_PPC  Power Macintosh powerpc
ppc7450

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 Feb 12 10:32 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 Sep 10  2003 IOPCCardFamily.kext

### wirelesscard info

     | |         |   "VersionOneInfo" = ("Belkin","11Mbps Wireless 
Notebook Netw$
     | |       +-o pccard156,2@0,0  <class IOPCCard16Device>
     | |         |   "IOName" = "pccard156,2"
     | |           |   "IONameMatch" = 
("pccard156,2","pccard1eb,807","pccard274$
     | |           |   "IONameMatched" = "pccard156,2"

Hello: I have installed the driver, and am getting a strong signal in 
the WirelessConfig pane. Network Port Configuration is checked for 
Ethernet Adaptor (en3). Connection light is showing on the Belkin Card. 
But when I try to browse, no connection. TIA for any advise. Murray

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::203:93ff:fe92:49ca%en0 prefixlen 64 scopeid 0x4
         ether 00:03:93:92:49:ca
         media: autoselect (none) status: inactive
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 
100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX 
<full-duplex,hw-loopback> 1000baseTX <full-duplex> 1000baseTX 
<full-duplex,hw-loopback> 1000baseTX <full-duplex,flow-control> 
1000baseTX <full-duplex,flow-control,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::230:65ff:fe24:a723%en1 prefixlen 64 scopeid 0x5
         inet 192.168.2.39 netmask 0xffffff00 broadcast 192.168.2.255
         ether 00:30:65:24:a7:23
         media: autoselect status: active
         supported media: autoselect
en3: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::230:bdff:fe62:a965%en3 prefixlen 64 scopeid 0x6
         inet 192.168.2.39 netmask 0xffffff00 broadcast 192.168.2.255
         ether 00:30:bd:62:a9:65
         media: <unknown type> (DS11 <full-duplex>) status: active
         supported media: none manual autoselect DS1 <half-duplex> DS1 
<full-duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS5 
<full-duplex> DS11 <half-duplex> DS11 <full-duplex>

### wd command line tool status

/Volumes/WirelessDriver beta 5.1/Utilities/Troubleshooting Info.command: 
WirelessConfig: command not found
logout
[Process completed]
-- 
Thank you.

Murray Reynolds
President - Reynolds Marketing

Telephone: 951.506.1956
Facsimile: 951.506.1958
Email: mu...@re...

42200 Colleen Circle
Temecula . CA . 92592