|
From: Kori L. <ko...@ma...> - 2005-01-02 02:04:41
|
You do not have a complete installation -
On Sep 25, 2004, at 12:04 AM,
wir...@li... wrote:
PPane.prefPane
/bin/ls: /usr/local/bin: No such file or directory
You should see this in the output:
### wireless driver files installed
drwxr-xr-x 3 root wheel 102 15 May 2003 WirelessDriver.kext
drwxr-xr-x 3 root wheel 102 24 Sep 2003 IOPCCardFamily.kext
drwxrwxrwx 3 kori admin 102 15 May 2003 WirelessDriver
PPane.prefPane
IF you do not have these three lines, then the software is not
installed correctly.
You can move them manually to the correct places.
This is where you must put things:
WirelessDriver.kext goes into /System/Library/Extensions
WirelessDriver PPane.prefPane goes into /Library/PreferencePanes
YOU MAY NOT have a /Library/PreferencePanes/ folder - Create one, then
move the wirelessdriver ppan.prefpane into it.
BTW /library is in the root directory - i.e., your hard drive name/,
next to /System, /Users, etc
Run the troubleshooting.info program again. You should have what I
show above. Make sure the privileges are the same.
Reboot the computer.
Go to System Preferences and you will have a Wireless Config panel
there. Enter your information and you should be up and running.
========================================================
1. Lombard do not work with DWL-650 running Panther. (Francisco
Javier Dominguez Rogers)
--__--__--
Message: 1
To: wir...@li...
From: Francisco Javier Dominguez Rogers <f_j...@te...>
Date: Fri, 31 Dec 2004 15:51:00 -0300
Subject: [Wirelessdriver-support] Lombard do not work with DWL-650
running Panther.
Hello to all;
Merry Christmas and a very happy new year.
Well. I have a D-Link DWL-650 rev. P inserted into my Lombard
It's very funy to see the Act light turned on and it's Finder
recognition in the menu. But any more happens.
No new port detected in the Network Pane, or by the driver.
Any suggestions will be welcome
SYSTEM INFO:
Last login: Thu Dec 30 20:30:01 on console
Welcome to Darwin!
Gronos-Slim-X:~ grono$ /Volumes/WirelessDriver\ beta\
5.1/Utilities/Troubleshooting\ Info.command
### system info
ProductName: Mac OS X
ProductVersion: 10.3.7
BuildVersion: 7S215
Darwin Gronos-Slim-X.local 7.7.0 Darwin Kernel Version 7.7.0: Sun Nov
7 16:06:51 PST 2004; root:xnu/xnu-517.9.5.obj~1/RELEASE_PPC Power
Macintosh powerpc
ppc750
### wireless driver files installed
drwxr-xr-x 3 root wheel 102 30 Dec 21:31 WirelessDriver.kext
drwxr-xr-x 3 root wheel 102 24 Sep 2003 IOPCCardFamily.kext
### wirelesscard info
| "VersionOneInfo" = ("D-Link","DWL-650 Wireless PC
Card RevP$
| +-o pccardb,7110@0,0 <class IOPCCard16Device,
registered, matche$
| "IOName" = "pccardb,7110"
### network info
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:50:e4:d0:71:38
media: autoselect (10baseT/UTP <half-duplex>) status: active
supported media: none autoselect 10baseT/UTP <half-duplex>
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX
<full-duplex>
ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492
inet 200.112.32.169 --> 10.52.70.3 netmask 0xffffff00
### wd command line tool status
/Volumes/WirelessDriver beta 5.1/Utilities/Troubleshooting
Info.command: line 33: WirelessConfig: command not found
Gronos-Slim-X:~ grono$
AND FOLLOW THE CONFIG
Last login: Fri Dec 31 15:01:56 on ttyp1
Welcome to Darwin!
Gronos-Slim-X:~ grono$ /Volumes/WirelessDriver\ beta\
5.1/Utilities/WirelessConfig
2004-12-31 15:24:14.994 WirelessConfig[872] Iterations: 0
WirelessDriver: Couldn't find a WirelessDriver service in registry - is
the card loaded?
Gronos-Slim-X:~ grono$
--__--__--
_______________________________________________
Wirelessdriver-support mailing list
Wir...@li...
https://lists.sourceforge.net/lists/listinfo/wirelessdriver-support
End of Wirelessdriver-support Digest
|