Menu
▾
▴
[Wirelessdriver-support] Re: Problem with Netgear MA401 (Jim Whiteside)
|
From: Kori L. <ko...@ma...> - 2004-12-29 13:55:54
|
You do not have a complete installation -
On Sep 25, 2004, at 12:04 AM,
wir...@li... wrote:
PPane.prefPane
/bin/ls: /usr/local/bin: No such file or directory
You should see this in the output:
### wireless driver files installed
drwxr-xr-x 3 root wheel 102 15 May 2003 WirelessDriver.kext
drwxr-xr-x 3 root wheel 102 24 Sep 2003 IOPCCardFamily.kext
drwxrwxrwx 3 kori admin 102 15 May 2003 WirelessDriver
PPane.prefPane
IF you do not have these three lines, then the software is not
installed correctly.
You can move them manually to the correct places.
This is where you must put things:
WirelessDriver.kext goes into /System/Library/Extensions
WirelessDriver PPane.prefPane goes into /Library/PreferencePanes
YOU MAY NOT have a /Library/PreferencePanes/ folder - Create one, then
move the wirelessdriver ppan.prefpane into it.
BTW /library is in the root directory - i.e., your hard drive name/,
next to /System, /Users, etc
Run the troubleshooting.info program again. You should have what I
show above. Make sure the privileges are the same.
Reboot the computer.
Go to System Preferences and you will have a Wireless Config panel
there. Enter your information and you should be up and running.
========================================================
Here is the output of the troubleshooting script:
Last login: Mon Dec 27 10:48:57 on ttyp2
/Users/test/Desktop/Troubleshooting\ Info.command; exit
Welcome to Darwin!
[s-Computer:~] test% /Users/test/Desktop/Troubleshooting\ Info.command;
exit
### kext versions
Index Refs Address Size Wired Name (Version) <Linked
Against>
33 0 0x18b7b000 0x21000 0x20000
com.apple.iokit.IOPCCardFamily
(1.4.0)
Index Refs Address Size Wired Name (Version) <Linked
Against>
### system info
ProductName: Mac OS X
ProductVersion: 10.2.8
BuildVersion: 6R73
Darwin s-Computer.local. 6.8 Darwin Kernel Version 6.8: Wed Sep 10
15:20:55 PDT
2003; root:xnu/xnu-344.49.obj~2/RELEASE_PPC Power Macintosh powerpc
ppc7450
/bin:/sbin:/usr/bin:/usr/sbin
### wireless driver files installed
drwxr-xr-x 3 root admin 102 Dec 27 10:07 SigMeter.app
drwxr-xr-x 3 root wheel 102 Sep 10 2003 IOPCCardFamily.kext
drwxr-xr-x 3 root wheel 102 Sep 11 2003 AppleAirPort.kext
drwxr-xr-x 3 root wheel 102 Sep 10 2003 AppleAirPort2.kext
drwxr-xr-x 3 root wheel 102 Sep 11 2003 AppleAirPortFW.kext
/bin/ls: /Library/PreferencePanes: No such file or directory
drwxr-xr-x 3 root wheel 102 Dec 27 10:07 WirelessDriver
PPane.prefPane
### wirelesscard info
| | "VersionOneInfo" = ("NETGEAR MA401RA Wireless
PC","Card","I$
| | +-o pccardb,7300@0,0 <class IOPCCard16Device>
| | "IOName" = "pccardb,7300"
### network info
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::203:93ff:fe9b:d994%en0 prefixlen 64 scopeid 0x4
inet 192.168.1.19 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:03:93:9b:d9:94
media: autoselect (100baseTX <half-duplex>) status: active
supported media: none autoselect 10baseT/UTP <half-duplex>
10baseT/UTP
<full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX
<half-duplex>
100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 1000baseTX
<full-duplex> 1000baseTX <full-duplex,hw-loopback> 1000baseTX
<full-duplex,flow-control> 1000baseTX
<full-duplex,flow-control,hw-loopback>
### wd command line tool status
/Users/test/Desktop/Troubleshooting Info.command:
/usr/local/bin/WirelessConfig:
No such file or directory
logout
[Process completed]
Did something not install correctly?
Many thanks,
Jim Whiteside.
--__--__--
_______________________________________________
Wirelessdriver-support mailing list
Wir...@li...
https://lists.sourceforge.net/lists/listinfo/wirelessdriver-support
End of Wirelessdriver-support Digest
|
