[Wirelessdriver-support] Re:alex

[Kori L. <ko...@ma...>]

Alex,
Have you repaired permissions using the Disk Utility?
    Have you gone to the System Preferences and opened the "Wireless 
Config" panel, to select the wireless you want to connect to?
  I suggest you start with no password to get started.  If that works, 
you can add a password to the WAP later.
I've copied my troubleshooting file so you can see what it should look 
like.  en1 is the wireless connection.
Kori

Last login: Thu Dec 16 22:52:50 on console
Welcome to Darwin!
You have mail.
/Applications/Utilities/WirelessDriver\ beta\ 
5.1/Utilities/Troubleshooting\ Info.command; exit
[server:~] kori% /Applications/Utilities/WirelessDriver\ beta\ 
5.1/Utilities/Troubleshooting\ Info.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.3.7
BuildVersion:   7S215
Darwin server.local 7.7.0 Darwin Kernel Version 7.7.0: Sun Nov  7 
16:06:51 PST 2004; root:xnu/xnu-517.9.5.obj~1/RELEASE_PPC  Power 
Macintosh powerpc
ppc750

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 15 May  2003 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 24 Sep  2003 IOPCCardFamily.kext
drwxrwxrwx   3 kori  admin   102 15 May  2003 WirelessDriver 
PPane.prefPane

### wirelesscard info

     |           |   "VersionOneInfo" = ("Lucent 
Technologies","WaveLAN/IEEE","V$
     |             |   "VersionOneInfo" = ("Lucent 
Technologies","WaveLAN/IEEE")
     |         +-o pccard156,2@0,0  <class IOPCCard16Device, registered, 
matched$
     |           |   "IOName" = "pccard156,2"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         ether 00:50:e4:ce:09:13
         media: autoselect (none) status: inactive
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX 
<full-duplex>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::202:2dff:fe37:18d9 prefixlen 64 scopeid 0x5
         inet 192.168.2.71 netmask 0xffffff00 broadcast 192.168.2.255
         ether 00:02:2d:37:18:d9
         media: <unknown type> (DS11 <full-duplex>) status: active
         supported media: none manual autoselect DS1 <half-duplex> DS1 
<full-duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS5 
<full-duplex> DS11 <half-duplex> DS11 <full-duplex>

[Process completed]### wd command line tool status