[Wirelessdriver-support] (no subject)

[Alex <nan...@gm...>]

Hi everyone

Well my Orinoco PC card still doesn't work after having installed the 
drivers and used the troubleshooting tips on top of the FAQ page. The 
problem is that I'm not sure if it even works since I bought the 
PowerBook without even knowing about the card. I'll just post the 
troubleshoot script results and hope someone has a solution. Thanks in 
advance!

### kext versions

/Volumes/  /Downloads/Troubleshooting Info.command: line 5: 
/usr/sbin/kextstat: No such file or directory
/Volumes/  /Downloads/Troubleshooting Info.command: line 6: 
/usr/sbin/kextstat: No such file or directory

### system info

ProductName:    Mac OS X
ProductVersion: 10.3.7
BuildVersion:   7S215
Darwin Pismos-Computer.local 7.7.0 Darwin Kernel Version 7.7.0: Sun Nov 
  7 16:06:51 PST 2004; root:xnu/xnu-517.9.5.obj~1/RELEASE_PPC  Power 
Macintosh powerpc
ppc750
/usr/bin:/bin:/usr/sbin:/sbin:/Users/pismo

### wireless driver files installed

drwxr-xr-x   3 pismo  wheel    102 16 Dec 01:22 SigMeter.app
drwxr-xr-x    3 root  wheel   102 16 Dec 01:22 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 25 Sep  2003 IOPCCardFamily.kext
drwxr-xr-x    3 root  wheel   102 25 Sep  2003 AppleAirPort.kext
drwxr-xr-x    3 root  wheel   102 25 Sep  2003 AppleAirPort2.kext
drwxr-xr-x    3 root  wheel   102 25 Sep  2003 AppleAirPortFW.kext
drwxr-xr-x   3 pismo  wheel   102 16 Dec 01:22 WirelessDriver 
PPane.prefPane
ls: /usr/local/bin: No such file or directory
/Volumes/  /Downloads/Troubleshooting Info.command: line 24: 
/usr/bin/defaults: No such file or directory
/Volumes/  /Downloads/Troubleshooting Info.command: line 25: 
/usr/bin/defaults: No such file or directory

### wirelesscard info


### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::230:65ff:feb6:dc7a prefixlen 64 scopeid 0x4
         inet 192.168.1.201 netmask 0xffffff00 broadcast 192.168.1.255
         ether 00:30:65:b6:dc:7a
         media: autoselect (100baseTX <full-duplex>) status: active
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 
100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX 
<full-duplex,hw-loopback>
fw0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 2030
         lladdr 00:30:65:ff:fe:b6:dc:7a
         media: autoselect <full-duplex> status: inactive
         supported media: autoselect <full-duplex>

### wd command line tool status

/Volumes/  /Downloads/Troubleshooting Info.command: line 38: 
/usr/local/bin/WirelessConfig: No such file or directory