[Wirelessdriver-support] Orinoco 11a/b/g Gold Combo card with OS 10.3.6

[Louis S. <lou...@gm...>]

Device: Powerbook G4 800 with Airport card installed
OS: 10.3.6
Card: Proxim ORiNOCO 11a/b/g ComboCard Gold
Driver: WirelessDriver 1.00b5

I have installed and uninstalled the driver couple times, but it didn't
work.
Driver is loaded:
:~]sudo kextload /System/Library/Extensions/WirelessDriver.kext/
kextload: /System/Library/Extensions/WirelessDriver.kext/ loaded
successfully
:~]kextstat | grep -i wirelessdriver
 88    0 0x25a05000 0xe000     0xd000     org.noncontiguous.WirelessDriver
(1.0.0b5) <33 29 10>

And below is the troubleshooting message:
### system info

ProductName:    Mac OS X
ProductVersion: 10.3.6
BuildVersion:   7R28
Darwin Holofernes.local 7.6.0 Darwin Kernel Version 7.6.0: Sun Oct 10
12:05:27 PDT 2004; root:xnu/xnu-517.9.4.obj~1/RELEASE_PPC  Power Macintosh
powerpc
ppc7450

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 13 Dec 23:11 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102  6 Jan  2004 IOPCCardFamily.kext

### wirelesscard info

    | |             "VersionOneInfo" = ("Atheros Communications,
Inc.","AR5001-0000-0000","Wireless LAN Refer$
### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet6 fe80::1 prefixlen 64 scopeid 0x1
        inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        ether 00:03:93:c2:c9:24
        media: autoselect (<unknown type>)
        supported media: none autoselect 10baseT/UTP <half-duplex>
10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX
<half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
1000baseTX <full-duplex> 1000baseTX <full-duplex,hw-loopback> 1000baseTX
<full-duplex,flow-control> 1000baseTX <full-duplex,flow-control,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::230:65ff:fe06:6343 prefixlen 64 scopeid 0x5
        inet 192.168.11.5 netmask 0xffffff00 broadcast 192.168.11.255
        ether 00:30:65:06:63:43
        media: autoselect status: active
        supported media: autoselect
fw0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 2030
        lladdr 00:03:93:ff:fe:c2:c9:24
        media: autoselect <full-duplex> status: inactive
        supported media: autoselect <full-duplex>

### wd command line tool status

2004-12-13 23:53:20.835 WirelessConfig[483] Iterations: 0
WirelessDriver: Couldn't find a WirelessDriver service in registry - is the
card loaded?
Usage - WirelessConfig [-showstatus] or WirelessConfig [-showstatus]
<-netname <network>> [-wepkey <key>] [-keyslot <slot>]
 -netname <name>     Sets the network name - enclose in double quotes
                      if your network contains a space.

 -wepkey <hex key>   Sets your network key, if ommited the network is
                      assumed to not have wep.

 -keyslot <[1-4]>    Sets which keyslot to have your key in. If
                      ommited keyslot 1 is assumed.

 -status             Prints out the network information, includes
                      signal strength.

 -writeprefs         Writes out the options to the preference file in
~/Library/Preferences/org.noncontinuous.wirelessdriver

With no options set or just the status, WirelessConfig will look for the
preferences made by the preference pane in
~/Library/Preferences/org.noncontinuous.WirelessDriver.

Thanks for your assistant

Louis
-- 
If you make me believe the being of a seed, I'll expect a miracle to happen. 
- Thoreau, Henry David