[Wirelessdriver-support] (no subject)

[Andrew B. <and...@bl...>]

Anybody help me with this - the card is a proxim skyline (intersil 
prism II chipset I believe) lombard 400mhz OS 10.2.8

below is script




Last login: Sat Dec  4 00:16:30 on ttyp1
/Applications/Utilities/Troubleshooting\ Info.command; exit
Welcome to Darwin!
[Andrew-Beardsmores-PowerBook:~] andrewbeardsmore% 
/Applications/Utilities/Troubleshooting\ Info.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.8
BuildVersion:   6R73
Darwin Andrew-Beardsmores-PowerBook.local. 6.8 Darwin Kernel Version 
6.8: Wed Sep 10 15:20:55 PDT 2003; 
root:xnu/xnu-344.49.obj~2/RELEASE_PPC  Power Macintosh powerpc
ppc750

### wireless driver files installed

drwxr-xr-x    4 root  wheel   136 Dec  4 00:01 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 Sep 10  2003 IOPCCardFamily.kext
drwxr-xr-x   3 andrewbe  admin     102 Dec  4 00:00 WirelessDriver 
PPane.prefPane

### wirelesscard info

     | |         |   "VersionOneInfo" = 
("INTERSIL","HFA384x/IEEE","Version 01.0$
     | |       +-o pccard156,2@0,0  <class IOPCCard16Device>
     | |         |   "IOName" = "pccard156,2"
     | |           |   "IONameMatch" = 
("pccardb,7300","pccardb,7100","pccardb,7$
     | |           |   "IONameMatched" = "pccard156,2"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::200:c5ff:fe09:3078%en1 prefixlen 64 scopeid 0x4
         ether 00:00:c5:09:30:78
         media: autoselect (<unknown type>) status: inactive
         supported media: autoselect
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::250:e4ff:fe3a:be59%en0 prefixlen 64 scopeid 0x5
         inet 10.0.1.4 netmask 0xffffff00 broadcast 10.0.1.255
         ether 00:50:e4:3a:be:59
         media: autoselect (10baseT/UTP <half-duplex>) status: active
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX 
<full-duplex>

### wd command line tool status

/Applications/Utilities/Troubleshooting Info.command: WirelessConfig: 
command not found
logout
[Process completed]