[Wirelessdriver-support] Linksys WPC-11

[User <st...@pa...>]

hi all,
i've read the list of compatible pc card n bought the above since it is 
in the list. however, after d/l the wirelessdriver n plugged in the 
card, it was not detected! tried a few times but no difference. ran the 
troubleshooting script n here it is:

Last login: Sat Sep 18 07:35:58 on ttyp1
/Users/user/Desktop/Troubleshooting\ Info.command; exit
Welcome to Darwin!
[stleung-Computer:~] user% /Users/user/Desktop/Troubleshooting\ 
Info.command; exit

### kext versions

Index Refs Address    Size       Wired      Name (Version) <Linked 
Against>
    35    0 0x19697000 0x21000    0x20000    
com.apple.iokit.IOPCCardFamily (1.4.0)
Index Refs Address    Size       Wired      Name (Version) <Linked 
Against>

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.8
BuildVersion:   6R73
Darwin stleung-Computer.local. 6.8 Darwin Kernel Version 6.8: Wed Sep 
10 15:20:55 PDT 2003; root:xnu/xnu-344.49.obj~2/RELEASE_PPC  Power 
Macintosh powerpc
ppc750
/bin:/sbin:/usr/bin:/usr/sbin

### wireless driver files installed

drwxr-xr-x   3 root  admin    102 Jan  1  1970 SigMeter.app
drwxr-xr-x    3 root  wheel   102 Sep 11  2003 IOPCCardFamily.kext
drwxr-xr-x    3 root  wheel   102 Sep 11  2003 AppleAirPort.kext
drwxr-xr-x    3 root  wheel   102 Sep 11  2003 AppleAirPort2.kext
drwxr-xr-x    3 root  wheel   102 Sep 11  2003 AppleAirPortFW.kext
drwxr-xr-x   3 root  wheel   102 Sep 18 08:29 WirelessConfig.prefPane
drwxr-xr-x   3 root  wheel   102 Jan  1  1970 WirelessDriver 
PPane.prefPane
/bin/ls: /usr/local/bin: No such file or directory

### wirelesscard info

     | |             "VersionOneInfo" = ("The Linksys Group, 
Inc.","Instant Wire$
     | |       +-o pccard274,1613@0,0  <class IOPCCard16Device>
     | |             "IOName" = "pccard274,1613"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
         tunnel inet  -->
         ether 00:0a:27:e1:39:9e
         media: autoselect (none) status: inactive
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 
100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX 
<full-duplex,hw-loopback>
en2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::20d:2fff:fe01:76c0%en2 prefixlen 64 scopeid 0x5
         inet 192.168.1.104 netmask 0xffffff00 broadcast 192.168.1.255
         ether 00:0d:2f:01:76:c0
         media: autoselect status: active
         supported media: none manual autoselect DS1 <half-duplex> DS1 
<full-duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS5 
<full-duplex> DS11 <half-duplex> DS11 <full-duplex>

### wd command line tool status

/Users/user/Desktop/Troubleshooting Info.command: 
/usr/local/bin/WirelessConfig: No such file or directory
logout
[Process completed]


i'm using os x 10.2.8 n the pc card is Linksys WPC-11 version 3 it said 
on the card. is it still supported?

appreciate ur help on this. hope it will work since i do not hv a 
airport card on my old pismo. thanks a lot.

stanley