[Wirelessdriver-support] WaveLan 10.3.3 is not recognized... Please help.

[enrique <en...@pf...>]

Hello! Help me please!

I have a WaveLan Bronze, running osx 10.3.3, I have installed the 
WirelessDriver and I get no signal. The green LED on the card blinks at 
an interval.

This is the terminal window information

Last login: Fri May 21 19:03:45 on console
/Users/enrique/Desktop/Troubleshooting\ Info.1.command; exit
-bash-2.05b$ /Users/enrique/Desktop/Troubleshooting\ Info.1.command; 
exit

### kext versions

/Users/enrique/Desktop/Troubleshooting Info.1.command: line 5: 
/usr/sbin/kextstat: No such file or directory
/Users/enrique/Desktop/Troubleshooting Info.1.command: line 6: 
/usr/sbin/kextstat: No such file or directory

### system info

ProductName:    Mac OS X
ProductVersion: 10.3.3
BuildVersion:   7F44
Darwin Powerbook 7.3.0 Darwin Kernel Version 7.3.0: Fri Mar  5 14:22:55 
PST 2004; root:xnu/xnu-517.3.15.obj~4/RELEASE_PPC  Power Macintosh 
powerpc
ppc750
/usr/bin:/bin:/usr/sbin:/sbin:/Users/enrique

### wireless driver files installed

drwxr-xr-x   3 enrique  wheel      102 21 May 18:16 SigMeter.app
drwxr-xr-x    3 root  wheel   102 21 May 15:38 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 24 Sep  2003 IOPCCardFamily.kext
drwxr-xr-x    3 root  wheel   102 24 Sep  2003 AppleAirPort.kext
drwxr-xr-x    3 root  wheel   102 24 Sep  2003 AppleAirPort2.kext
drwxr-xr-x    3 root  wheel   102 24 Sep  2003 AppleAirPortFW.kext
drwxr-xr-x   3 enrique  wheel   102 21 May 15:38 WirelessDriver 
PPane.prefPane
ls: /usr/local/bin: No such file or directory
/Users/enrique/Desktop/Troubleshooting Info.1.command: line 24: 
/usr/bin/defaults: No such file or directory
/Users/enrique/Desktop/Troubleshooting Info.1.command: line 25: 
/usr/bin/defaults: No such file or directory

### wirelesscard info

     | |         |   "VersionOneInfo" = ("Lucent 
Technologies","WaveLAN/IEEE","V$
     | |           |   "VersionOneInfo" = ("Lucent 
Technologies","WaveLAN/IEEE")
     | |       +-o pccard156,2@0,0  <class IOPCCard16Device, registered, 
matched$
     | |         |   "IOName" = "pccard156,2"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::230:65ff:fe44:5106 prefixlen 64 scopeid 0x4
         inet 192.168.0.4 netmask 0xffffff00 broadcast 192.168.0.255
         ether 00:30:65:44:51:06
         media: autoselect (100baseTX <full-duplex>) status: active
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 
100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX 
<full-duplex,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::260:1dff:fe1b:ec5c prefixlen 64 scopeid 0x5
         inet 192.168.0.25 netmask 0xffffff00 broadcast 192.168.0.255
         ether 00:60:1d:1b:ec:5c
         media: <unknown type> (DS11 <full-duplex>) status: active
         supported media: none manual autoselect DS1 <half-duplex> DS1 
<full-duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS5 
<full-duplex> DS11 <half-duplex> DS11 <full-duplex>
fw0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 2030
         lladdr 00:30:65:ff:fe:44:51:06
         media: autoselect <full-duplex> status: inactive
         supported media: autoselect <full-duplex>

### wd command line tool status

/Users/enrique/Desktop/Troubleshooting Info.1.command: line 38: 
/usr/local/bin/WirelessConfig: No such file or directory
logout
[Process completed]