[Wirelessdriver-support] SMC2532W-B EliteConnect Wireless Adaptor

[<ana...@ma...>]

I bought this prism2.5-based card thinking it would work with this driver however it doesn't appear to be loading. I will note that the card works fine with KisMAC. I also tried adding "pccardd601,5" to the driver property list to no avail. Here is the "Troubleshooting" info:

[PBTiPB:/Volumes/WirelessDriver beta 5.1/Utilities] anarkhos% ./Troubleshooting\ Info.command 

### system info

ProductName:    Mac OS X
ProductVersion: 10.3.3
BuildVersion:   7F44
Darwin PBTiPB.local 7.3.0 Darwin Kernel Version 7.3.0: Fri Mar  5 14:22:55 PST 2004; root:xnu/xnu-517.3.15.obj~4/RELEASE_PPC  Power Macintosh powerpc
ppc7450

### wireless driver files installed

drwxr-xr-x    3 root     wheel         102 Mar 19 21:56 WirelessDriver.kext
drwxr-xr-x    3 root     wheel         102 Sep 24 15:52 IOPCCardFamily.kext

### wirelesscard info

    | |             "VersionOneInfo" = ("SMC","SMC2532W-B EliteConnect Wireless$
    | |       +-o pccardd601,5@0,0  <class IOPCCard16Device, registered, matche$
    | |             "IOName" = "pccardd601,5"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128 
        inet6 fe80::1 prefixlen 64 scopeid 0x1 
        inet 127.0.0.1 netmask 0xff000000 
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        ether 00:0a:95:c9:3f:68 
        media: autoselect (none) status: inactive
        supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 1000baseTX <full-duplex> 1000baseTX <full-duplex,hw-loopback> 1000baseTX <full-duplex,flow-control> 1000baseTX <full-duplex,flow-control,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 192.168.0.5 netmask 0xffffff00 broadcast 192.168.0.255
        ether 00:30:65:07:b0:3b 
        media: autoselect status: active
        supported media: autoselect
fw0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 2030
        lladdr 00:0a:95:ff:fe:c9:3f:68 
        media: autoselect <full-duplex> status: inactive
        supported media: autoselect <full-duplex>

### wd command line tool status

2004-03-20 07:07:17.166 WirelessConfig[462] Iterations: 0
WirelessDriver: Couldn't find a WirelessDriver service in registry - is the card loaded?
Usage - WirelessConfig [-showstatus] or WirelessConfig [-showstatus] <-netname <network>> [-wepkey <key>] [-keyslot <slot>]
 -netname <name>     Sets the network name - enclose in double quotes
                      if your network contains a space.

 -wepkey <hex key>   Sets your network key, if ommited the network is
                      assumed to not have wep.

 -keyslot <[1-4]>    Sets which keyslot to have your key in. If
                      ommited keyslot 1 is assumed.

 -status             Prints out the network information, includes
                      signal strength.

 -writeprefs         Writes out the options to the preference file in                      ~/Library/Preferences/org.noncontinuous.wirelessdriver

With no options set or just the status, WirelessConfig will look for the preferences made by the preference pane in ~/Library/Preferences/org.noncontinuous.WirelessDriver.
[PBTiPB:/Volumes/WirelessDriver beta 5.1/Utilities] anarkhos% 

Please note that the network info is using the built-in AirPort, not the SMC card.