[Wirelessdriver-support] PCMCIA not recognized in Network control panel

[Craig H. <cra...@ea...>]

I Hope you can help.
I have two PCMCIA Cards The Belkin which I was told is not compatible 
and an Orinoco Model 8461-05 (802.11a/b combo) Silver card which I 
thought according to site reviews would work on my system.

Problem - I do not get a recognition on a (EN-1) or anything providing 
notice either card is seen. The Orinoco card Crashes the whole system 
and will not allow OSX to boot.
In addition I have tried to install the PCCard driver pkg on the apple 
website thinking it would help.
I have since lost the ability to see the PCMCIA cards on the desktop 
and cannot eject (even manually)

I am connected to a Belkin Wireless DSL Gateway Router FSD6230-3 if 
that helps. (no encryption settings)

The troubleshoot script is below which highlights my other system 
detail.

Please - anything you suggest would be greatly appreciated. I am in 
over my head here. I'm not good at understanding the Unix codes.

Thanks,
Craig

Last login: Fri Jan  9 16:49:00 on console
/Volumes/WirelessDriver\ beta\ 5.1/Utilities/Troubleshooting\ 
Info.command; exit
Welcome to Darwin!
[Craig-Hollands-Computer:~] craigholland% /Volumes/WirelessDriver\ 
beta\ 5.1/Utilities/Troubleshooting\ Info.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.8
BuildVersion:   6R73
Darwin Craig-Hollands-Computer.local. 6.8 Darwin Kernel Version 6.8: 
Wed Sep 10 15:20:55 PDT 2003; root:xnu/xnu-344.49.obj~2/RELEASE_PPC  
Power Macintosh powerpc
ppc750

### wireless driver files installed

drwxr-xr-x    3 root      wheel   102 Sep  9  2001 IOPCCardFamily.kext

### wirelesscard info

     |     |         "VersionOneInfo" = 
("Belkin","11Mbps-Wireless-Notebook-Netw$
     |     +-o pccard@13  <class IOPCIDevice>
     |     | |   "device_type" = <"pccard">
     |     | |   "name" = <"pccard">
     |     |   +-o pccard1bf,3302@1,0  <class IOPCCard16Device>
     |     |         "IOName" = "pccard1bf,3302"
     |     +-o pccard@13,1  <class IOPCIDevice>
     |       |   "device_type" = <"pccard">
     |       |   "name" = <"pccard">

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::205:2ff:fe89:9ec2%en0 prefixlen 64 scopeid 0x4
         inet 192.168.2.30 netmask 0xffffff00 broadcast 192.168.2.255
         ether 00:05:02:89:9e:c2
         media: autoselect (10baseT/UTP <half-duplex>) status: active
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX 
<full-duplex>

### wd command line tool status

/Volumes/WirelessDriver beta 5.1/Utilities/Troubleshooting 
Info.command: WirelessConfig: command not found
logout
[Process completed]