Menu
▾
▴
[Wirelessdriver-support] Bizarre behavior
|
From: Spencer P. <sp...@fn...> - 2004-01-08 22:58:48
|
I am using a PowerBook G3 (Wallstreet) with a Proxima/Farallon card.
It has been exhibiting bizarre behavior recently, and I would
appreciate any advice you could offer.
Sometimes, the card works flawlessly. Sometimes, it doesn't work at
all. Sometimes, it works for a while, then stops working until I
restart. Sometimes I can get it to start working again by putting the
machine to sleep, then removing and reinserting the card. I could go
on. . . .
Below are the results of the troubleshooting script run at four
different times. The first time was when the card was working after I
inserted it into the machine while it was asleep. The second time,
the card was working, and then stopped, so I ran the script. The
third time, the diode on the card didn't light up during startup, and
the card didn't work until a later restart. The fourth time, I
inserted the card while the machine was awake, and it didn't work.
Thank you for any help you can offer.
Best,
Spencer
---Begin Output 1 (light blinking, insertion while asleep, card working)---
Last login: Wed Jan 7 16:09:18 on console
/Users/spasero/Desktop/Troubleshooting\ Info.command; exit
NOTICE TO USERS
This is a Federal computer (and/or it is directly connected to a
Fermilab local network system) that is the property of the United
States Government. It is for authorized use only. Users (autho-
rized or unauthorized) have no explicit or implicit expectation
of privacy.
Any or all uses of this system and all files on this system may
be intercepted, monitored, recorded, copied, audited, inspected,
and disclosed to authorized site, Department of Energy and law
enforcement personnel, as well as authorized officials of other
agencies, both domestic and foreign. By using this system, the
user consents to such interception, monitoring, recording, copy-
ing, auditing, inspection, and disclosure at the discretion of
authorized site or Department of Energy personnel.
Unauthorized or improper use of this system may result in admin-
istrative disciplinary action and civil and criminal penalties.
By continuing to use this system you indicate your awareness of
and consent to these terms and conditions of use. LOG OFF IMME-
DIATELY if you do not agree to the conditions stated in this
warning.
Fermilab policy and rules for computing, including appropriate
use, may be found at http://www.fnal.gov/cd/main/cpolicy.html
**************************************************************************
Apple OSX 10.2 Jaguar Darwin Kernel Version 6.6
For questions, problems or information on this machine,
please send e-mail to jo...@fn....
*****************************************************************************
Welcome to Darwin!
[Dix:~] spasero% /Users/spasero/Desktop/Troubleshooting\ Info.command; exit
### kext versions
Index Refs Address Size Wired Name (Version) <Linked Against>
23 2 0xfbcc000 0x21000 0x20000
com.apple.iokit.IOPCCardFamily (1.4.0)
Index Refs Address Size Wired Name (Version) <Linked Against>
63 0 0x10165000 0xe000 0xd000
org.noncontiguous.WirelessDriver (1.0b5)
### system info
ProductName: Mac OS X
ProductVersion: 10.2.8
BuildVersion: 6R73
Darwin Dix.dhcp.fnal.gov 6.8 Darwin Kernel Version 6.8: Wed Sep 10
15:20:55 PDT 2003; root:xnu/xnu-344.49.obj~2/RELEASE_PPC Power
Macintosh powerpc
ppc750
/bin:/sbin:/usr/bin:/usr/sbin
### wireless driver files installed
drwxr-xr-x 3 root admin 102 Jan 7 15:10 SigMeter.app
drwxr-xr-x 3 root wheel 102 Jan 7 15:10 WirelessDriver.kext
drwxr-xr-x 3 root wheel 102 Sep 10 17:49 IOPCCardFamily.kext
drwxr-xr-x 3 root wheel 102 Sep 10 18:11 AppleAirPort.kext
drwxr-xr-x 3 root wheel 102 Sep 10 17:46 AppleAirPort2.kext
drwxr-xr-x 3 root wheel 102 Sep 10 18:10 AppleAirPortFW.kext
drwxr-xr-x 3 root wheel 102 Jan 7 15:10 WirelessDriver PPane.prefPane
### wirelesscard info
| | | "VersionOneInfo" =
("INTERSIL","HFA384x/IEEE","Version 01.0$
| +-o pccard@13 <class IOPCIDevice>
| | | "device_type" = <"pccard">
| | | "name" = <"pccard">
| +-o pccard@13,1 <class IOPCIDevice>
| | "device_type" = <"pccard">
| | "name" = <"pccard">
| | +-o pccard156,2@0,0 <class IOPCCard16Device>
| | | "IOName" = "pccard156,2"
| | | "IONameMatch" =
("pccard156,2","pccard1eb,807","pccard274$
| | | "IONameMatched" = "pccard156,2"
### network info
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::205:2ff:fe7b:1c83%en0 prefixlen 64 scopeid 0x4
ether 00:05:02:7b:1c:83
media: autoselect (none) status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex>
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX
<full-duplex>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::200:c5ff:fe09:8266%en1 prefixlen 64 scopeid 0x5
inet 131.225.95.162 netmask 0xffffff00 broadcast 131.225.95.255
ether 00:00:c5:09:82:66
media: <unknown type> (DS11 <full-duplex>) status: active
supported media: none manual autoselect DS1 <half-duplex> DS1
<full-duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex>
DS5 <full-duplex> DS11 <half-duplex> DS11 <full-duplex>
### wd command line tool status
/Users/spasero/Desktop/Troubleshooting Info.command:
/usr/local/bin/WirelessConfig: No such file or directory
logout
[Process completed]
---End Output 1 (light blinking, insertion while asleep, card working)---
---Begin Output 2 (light off, not working)---
nd; exit
[Dix:~] spasero% /Users/spasero/Desktop/Troubleshooting\ Info.command; exit
### kext versions
Index Refs Address Size Wired Name (Version) <Linked Against>
23 1 0xfbcc000 0x21000 0x20000
com.apple.iokit.IOPCCardFamily (1.4.0)
Index Refs Address Size Wired Name (Version) <Linked Against>
### system info
ProductName: Mac OS X
ProductVersion: 10.2.8
BuildVersion: 6R73
Darwin Dix.local. 6.8 Darwin Kernel Version 6.8: Wed Sep 10 15:20:55
PDT 2003; root:xnu/xnu-344.49.obj~2/RELEASE_PPC Power Macintosh
powerpc
ppc750
/bin:/sbin:/usr/bin:/usr/sbin
### wireless driver files installed
drwxr-xr-x 3 root admin 102 Jan 7 15:10 SigMeter.app
drwxr-xr-x 3 root wheel 102 Jan 7 15:10 WirelessDriver.kext
drwxr-xr-x 3 root wheel 102 Sep 10 17:49 IOPCCardFamily.kext
drwxr-xr-x 3 root wheel 102 Sep 10 18:11 AppleAirPort.kext
drwxr-xr-x 3 root wheel 102 Sep 10 17:46 AppleAirPort2.kext
drwxr-xr-x 3 root wheel 102 Sep 10 18:10 AppleAirPortFW.kext
drwxr-xr-x 3 root wheel 102 Jan 7 15:10 WirelessDriver PPane.prefPane
### wirelesscard info
| +-o pccard@13 <class IOPCIDevice>
| | | "device_type" = <"pccard">
| | | "name" = <"pccard">
| +-o pccard@13,1 <class IOPCIDevice>
| | "device_type" = <"pccard">
| | "name" = <"pccard">
### network info
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::205:2ff:fe7b:1c83%en0 prefixlen 64 scopeid 0x4
ether 00:05:02:7b:1c:83
media: autoselect (none) status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex>
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX
<full-duplex>
### wd command line tool status
/Users/spasero/Desktop/Troubleshooting Info.command:
/usr/local/bin/WirelessConfig: No such file or directory
logout
[Process completed]
---End Output 2 (light off, not working)---
---Begin Output 3 (light steady, insertion while awake, never working)---
Last login: Wed Jan 7 16:00:10 on console
/Users/spasero/Desktop/Troubleshooting\ Info.command; exit
NOTICE TO USERS
This is a Federal computer (and/or it is directly connected to a
Fermilab local network system) that is the property of the United
States Government. It is for authorized use only. Users (autho-
rized or unauthorized) have no explicit or implicit expectation
of privacy.
Any or all uses of this system and all files on this system may
be intercepted, monitored, recorded, copied, audited, inspected,
and disclosed to authorized site, Department of Energy and law
enforcement personnel, as well as authorized officials of other
agencies, both domestic and foreign. By using this system, the
user consents to such interception, monitoring, recording, copy-
ing, auditing, inspection, and disclosure at the discretion of
authorized site or Department of Energy personnel.
Unauthorized or improper use of this system may result in admin-
istrative disciplinary action and civil and criminal penalties.
By continuing to use this system you indicate your awareness of
and consent to these terms and conditions of use. LOG OFF IMME-
DIATELY if you do not agree to the conditions stated in this
warning.
Fermilab policy and rules for computing, including appropriate
use, may be found at http://www.fnal.gov/cd/main/cpolicy.html
**************************************************************************
Apple OSX 10.2 Jaguar Darwin Kernel Version 6.6
For questions, problems or information on this machine,
please send e-mail to jo...@fn....
*****************************************************************************
Welcome to Darwin!
[Dix:~] spasero% /Users/spasero/Desktop/Troubleshooting\ Info.command; exit
### kext versions
Index Refs Address Size Wired Name (Version) <Linked Against>
23 2 0xfbcc000 0x21000 0x20000
com.apple.iokit.IOPCCardFamily (1.4.0)
Index Refs Address Size Wired Name (Version) <Linked Against>
62 0 0x1019e000 0xe000 0xd000
org.noncontiguous.WirelessDriver (1.0b5)
### system info
ProductName: Mac OS X
ProductVersion: 10.2.8
BuildVersion: 6R73
Darwin Dix.local. 6.8 Darwin Kernel Version 6.8: Wed Sep 10 15:20:55
PDT 2003; root:xnu/xnu-344.49.obj~2/RELEASE_PPC Power Macintosh
powerpc
ppc750
/bin:/sbin:/usr/bin:/usr/sbin
### wireless driver files installed
drwxr-xr-x 3 root admin 102 Jan 7 15:10 SigMeter.app
drwxr-xr-x 3 root wheel 102 Jan 7 15:10 WirelessDriver.kext
drwxr-xr-x 3 root wheel 102 Sep 10 17:49 IOPCCardFamily.kext
drwxr-xr-x 3 root wheel 102 Sep 10 18:11 AppleAirPort.kext
drwxr-xr-x 3 root wheel 102 Sep 10 17:46 AppleAirPort2.kext
drwxr-xr-x 3 root wheel 102 Sep 10 18:10 AppleAirPortFW.kext
drwxr-xr-x 3 root wheel 102 Jan 7 15:10 WirelessDriver PPane.prefPane
### wirelesscard info
| | | "VersionOneInfo" =
("INTERSIL","HFA384x/IEEE","Version 01.0$
| +-o pccard@13 <class IOPCIDevice>
| | | "device_type" = <"pccard">
| | | "name" = <"pccard">
| +-o pccard@13,1 <class IOPCIDevice>
| | "device_type" = <"pccard">
| | "name" = <"pccard">
| | +-o pccard156,2@0,0 <class IOPCCard16Device>
| | | "IOName" = "pccard156,2"
| | "IONameMatch" =
("pccard156,2","pccard1eb,807","pccard274$
| | "IONameMatched" = "pccard156,2"
### network info
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::205:2ff:fe7b:1c83%en0 prefixlen 64 scopeid 0x4
ether 00:05:02:7b:1c:83
media: autoselect (none) status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex>
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX
<full-duplex>
### wd command line tool status
/Users/spasero/Desktop/Troubleshooting Info.command:
/usr/local/bin/WirelessConfig: No such file or directory
logout
[Process completed]
---End Output 3 (light steady, insertion while awake, never working)---
---Begin Output 4 (light blinking, card was working, but stopped)---
[Dix:~] spasero% /Users/spasero/Desktop/Troubleshooting\ Info.command; exit
### kext versions
Index Refs Address Size Wired Name (Version) <Linked Against>
23 2 0xfbcc000 0x21000 0x20000
com.apple.iokit.IOPCCardFamily (1.4.0)
Index Refs Address Size Wired Name (Version) <Linked Against>
44 0 0xe448000 0xe000 0xd000
org.noncontiguous.WirelessDriver (1.0b5)
### system info
ProductName: Mac OS X
ProductVersion: 10.2.8
BuildVersion: 6R73
Darwin Dix.dhcp.fnal.gov 6.8 Darwin Kernel Version 6.8: Wed Sep 10
15:20:55 PDT 2003; root:xnu/xnu-344.49.obj~2/RELEASE_PPC Power
Macintosh powerpc
ppc750
/bin:/sbin:/usr/bin:/usr/sbin
### wireless driver files installed
drwxr-xr-x 3 root admin 102 Jan 7 15:10 SigMeter.app
drwxr-xr-x 3 root wheel 102 Jan 7 15:10 WirelessDriver.kext
drwxr-xr-x 3 root wheel 102 Sep 10 17:49 IOPCCardFamily.kext
drwxr-xr-x 3 root wheel 102 Sep 10 18:11 AppleAirPort.kext
drwxr-xr-x 3 root wheel 102 Sep 10 17:46 AppleAirPort2.kext
drwxr-xr-x 3 root wheel 102 Sep 10 18:10 AppleAirPortFW.kext
drwxr-xr-x 3 root wheel 102 Jan 7 15:10 WirelessDriver PPane.prefPane
### wirelesscard info
| | | "VersionOneInfo" =
("INTERSIL","HFA384x/IEEE","Version 01.0$
| +-o pccard@13 <class IOPCIDevice>
| | | "device_type" = <"pccard">
| | | "name" = <"pccard">
| +-o pccard@13,1 <class IOPCIDevice>
| | "device_type" = <"pccard">
| | "name" = <"pccard">
| | +-o pccard156,2@0,0 <class IOPCCard16Device>
| | | "IOName" = "pccard156,2"
| | | "IONameMatch" =
("pccard156,2","pccard1eb,807","pccard274$
| | | "IONameMatched" = "pccard156,2"
### network info
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::200:c5ff:fe09:8266%en1 prefixlen 64 scopeid 0x4
inet 131.225.95.162 netmask 0xffffff00 broadcast 131.225.95.255
ether 00:00:c5:09:82:66
media: <unknown type> (DS11 <full-duplex>) status: active
supported media: none manual autoselect DS1 <half-duplex> DS1
<full-duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex>
DS5 <full-duplex> DS11 <half-duplex> DS11 <full-duplex>
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::205:2ff:fe7b:1c83%en0 prefixlen 64 scopeid 0x5
ether 00:05:02:7b:1c:83
media: autoselect (none) status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex>
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX
<full-duplex>
### wd command line tool status
/Users/spasero/Desktop/Troubleshooting Info.command:
/usr/local/bin/WirelessConfig: No such file or directory
logout
[Process completed]
---End Output 4 (light blinking, card was working, but stopped)---
|
