[Wirelessdriver-support] Orinoco gold don't switch on (Pwb G4 15")

[Jean-Pierre M. <jpm...@fr...>]

Bonjour,

I have an ORiNOCO Gold Card and a PowerBook G4 15" running 10.3.2
The installation of the wireless driver seems fine (I see the new ethernet
en2 port)
But the two green lights of the card do not flash, as they do on my
powerbook G3 running OS 9.2 (The card works perfectly on the G3). They give
a very brief flash every 5 seconds or so.

Once the gold card inserted, a new icon appears in the menu bar, where I se=
e
"switch on the card"

wWhen I do so, the icon disappears from the menu bar and nothing else...


If someone could give me an idea, I would be very gratefull !!


Jean-Pierre Mabille


Here is the troubleshooting report :
Last login: Wed Dec 31 17:26:39 on console
/Applications/Troubleshooting\ Info.command; exit
Welcome to Darwin!
Mac-G4-jpm:~ jpm$ /Applications/Troubleshooting\ Info.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.3.2
BuildVersion:   7D24
Darwin Mac-G4-jpm.local 7.2.0 Darwin Kernel Version 7.2.0: Thu Dec 11
16:20:23 PST 2003; root:xnu/xnu-517.3.7.obj~1/RELEASE_PPC  Power Macintosh
powerpc
ppc7450

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 31 Dec 16:02 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 25 Sep 00:52 IOPCCardFamily.kext
ls: /Library/PreferencePanes: No such file or directory

### wirelesscard info

    | |   |     |   "VersionOneInfo" =3D ("Avaya Communication","Avaya
Wireless P$
    | |   |   +-o pccard156,2@0,0  <class IOPCCard16Device, registered,
matched$
    | |   |     |   "IOName" =3D "pccard156,2"
    | |   |       |   "IONameMatched" =3D "pccard156,2"
    | |   |       |   "IONameMatch" =3D
("pccard156,2","pccard1eb,807","pccard274$

### network info

lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
gif0: flags=3D8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=3D0<> mtu 1280
en2: flags=3D8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::202:2dff:fe66:67ac prefixlen 64 scopeid 0x4
        inet 169.254.16.39 netmask 0xffff0000 broadcast 169.254.255.255
        ether 00:02:2d:66:67:ac
        media: <unknown type> (DS11 <full-duplex>) status: active
        supported media: none manual autoselect DS1 <half-duplex> DS1
<full-duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS5
<full-duplex> DS11 <half-duplex> DS11 <full-duplex>
en0: flags=3D8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
        tunnel inet  -->
        ether 00:0a:95:cd:a2:ca
en1: flags=3D8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
        tunnel inet  -->
        ether 00:0a:95:f5:35:d4
        media: autoselect (<unknown type>) status: inactive
        supported media: autoselect
fw0: flags=3D8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 4078
        tunnel inet  -->
        lladdr 00:0a:95:ff:fe:cd:a2:ca
        media: autoselect <full-duplex> status: inactive
        supported media: autoselect <full-duplex>

### wd command line tool status

/Applications/Troubleshooting Info.command: line 33: WirelessConfig: comman=
d
not found
logout
[Op=E9ration termin=E9e]