[Wirelessdriver-support] Contact to base but no network

[Mats B. <ben...@ti...>]

I seem to be in contact to my basestation (D-link 514) but I dont get 
any contact with the network or internet.
I get a correct IP number vfrom the router but nothing else works.
I have run the troublshooting script and here are the result.Welcome to 
Darwin!
/Volumes/WirelessDriver\ beta\ 5.1/Utilities/Troubleshooting\ 
Info.command; exit
[Mats-Bengtssons-dator:~] matsbengtsson% /Volumes/WirelessDriver\ beta\ 
5.1/Utilities/Troubleshooting\ Info.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.8
BuildVersion:   6R73
Darwin Mats-Bengtssons-dator.local. 6.8 Darwin Kernel Version 6.8: Wed 
Sep 10 15:20:55 PDT 2003; root:xnu/xnu-344.49.obj~2/RELEASE_PPC  Power 
Macintosh powerpc
ppc750

### wireless driver files installed

drwxr-xr-x    3 root      wheel    102 Mar 21 14:55 WirelessDriver.kext
drwxr-xr-x    3 root      wheel    102 Sep 11  2003 IOPCCardFamily.kext
ls: /Library/PreferencePanes: No such file or directory

### wirelesscard info

     |       |   |   "VersionOneInfo" = ("Lucent 
Technologies","WaveLAN/IEEE","Version 01.01","")
     |       |     |   "VersionOneInfo" = ("Lucent 
Technologies","WaveLAN/IEEE")
     |     +-o pccard@13  <class IOPCIDevice>
     |     | |   "device_type" = <"pccard">
     |     | |   "name" = <"pccard">
     |     +-o pccard@13,1  <class IOPCIDevice>
     |       |   "device_type" = <"pccard">
     |       |   "name" = <"pccard">
     |       | +-o pccard156,2@1,0  <class IOPCCard16Device>
     |       |   |   "IOName" = "pccard156,2"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::202:2dff:fe0e:6550%en1 prefixlen 64 scopeid 0x4
         inet 192.168.0.101 netmask 0xffffff00 broadcast 192.168.0.255
         ether 00:02:2d:0e:65:50
         media: <unknown type> (DS11 <full-duplex>) status: active
         supported media: none manual autoselect DS1 <half-duplex> DS1 
<full-duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS5 
<full-duplex> DS11 <half-duplex> DS11 <full-duplex>
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::205:2ff:fe4d:5e48%en0 prefixlen 64 scopeid 0x5
         inet 192.168.0.102 netmask 0xffffff00 broadcast 192.168.0.255
         ether 00:05:02:4d:5e:48
         media: autoselect (10baseT/UTP <half-duplex>) status: active
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX 
<full-duplex>

### wd command line tool status

/Volumes/WirelessDriver beta 5.1/Utilities/Troubleshooting 
Info.command: WirelessConfig: command not found
logout
[Process completed]

I hope this helps.

Mats B
karlstad Sweden