[Wirelessdriver-support] Panther, DHCP, Orinoco, Lombard

[Thomas A. <Tom...@gm...>]

Hi,

I've seen the posts with the problem obtaining a new IP address via  
DHCP. My Network preferences just stick to the stupid 169... address it  
assigns to itself. Has anyone found some kind of solution? I don't know  
if the archives of this mailing list are complete.

Thanks

Tom

PS:

### kext versions

Index Refs Address    Size       Wired      Name (Version) <Linked  
Against>
    39    1 0x630000   0x21000    0x20000     
com.apple.iokit.IOPCCardFamily (1.5.0)
Index Refs Address    Size       Wired      Name (Version) <Linked  
Against>
    51    0 0x654000   0xe000     0xd000      
org.noncontiguous.WirelessDriver (1.0.0b5)

### system info

ProductName:    Mac OS X
ProductVersion: 10.3.1
BuildVersion:   7C107
Darwin m0A020AEF.vpn.uni-freiburg.de 7.0.0 Darwin Kernel Version 7.0.0:  
Wed Sep 24 15:48:39 PDT 2003; root:xnu/xnu-517.obj~1/RELEASE_PPC  Power  
Macintosh powerpc
ppc750
/Developer/qt/bin:/sw/bin:/sw/sbin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/ 
X11R6/bin

### wireless driver files installed

drwxr-xr-x   3 tom   wheel    102 24 Nov 12:23 SigMeter.app
drwxr-xr-x    3 root  wheel   102 24 Nov 12:23 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 25 Sep 00:52 IOPCCardFamily.kext
drwxr-xr-x    3 root  wheel   102 17 Nov 16:13 AppleAirPort.kext
drwxr-xr-x    3 root  wheel   102 17 Nov 16:13 AppleAirPort2.kext
drwxr-xr-x    3 root  wheel   102 17 Nov 16:13 AppleAirPortFW.kext
drwxr-xr-x   3 tom   wheel   102 24 Nov 12:23 WirelessDriver  
PPane.prefPane

### wirelesscard info

     |           |   "VersionOneInfo" = ("Lucent  
Technologies","WaveLAN/IEEE","V$
     |             |   "VersionOneInfo" = ("Lucent  
Technologies","WaveLAN/IEEE")
     |         +-o pccard156,2@0,0  <class IOPCCard16Device, registered,  
matched$
     |           |   "IOName" = "pccard156,2"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en1: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
         tunnel inet  -->
         ether 00:02:2d:65:e8:ac
         media: <unknown type> (DS11 <full-duplex>) status: active
         supported media: none manual autoselect DS1 <half-duplex> DS1  
<full-duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS5  
<full-duplex> DS11 <half-duplex> DS11 <full-duplex>
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1212
         inet6 fe80::250:e4ff:fe05:ef2e prefixlen 64 scopeid 0x5
         inet 10.2.10.239 netmask 0xffffff00 broadcast 10.2.10.255
         ether 00:50:e4:05:ef:2e
         media: autoselect (100baseTX <full-duplex>) status: active
         supported media: none autoselect 10baseT/UTP <half-duplex>  
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX  
<full-duplex>

### wd command line tool status