[Wirelessdriver-support] Powerbook 17 with Airport Extreme adding PMCIA Card

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

Hi All,

I have just moved to a new PB17", with Panther installed. Ran the 
install see, the Wireless configuration in the Control Panel, however 
when I try to add a Network interface, it only shows the In built ones. 
The installation seems to have created a EN1 interface, but it does not 
appear in Show Network interfaces. I am really keen to install a PCMCIA 
WIFI Card, a 200mwatt one, which has a Prism 2 Chipset, sorry for this 
currently used a SANDISK WIFI Card, so not sure if that is the problem. 
Thanks

Here is the troubleshooting script results.

Last login: Mon Nov  3 18:58:50 on ttyp1
Welcome to Darwin!
Rodney-Prescotts-Computer:~ rodney$ 
/Users/rodney/Desktop/Troubleshooting\ Info.command; exit

### kext versions

Index Refs Address    Size       Wired      Name (Version) <Linked 
Against>
    41    0 0x6e6000   0x21000    0x20000    
com.apple.iokit.IOPCCardFamily (1.5.0)
Index Refs Address    Size       Wired      Name (Version) <Linked 
Against>

### system info

ProductName:    Mac OS X
ProductVersion: 10.3
BuildVersion:   7B85
Darwin Rodney-Prescotts-Computer.local 7.0.0 Darwin Kernel Version 
7.0.0: Wed Sep 24 15:48:39 PDT 2003; root:xnu/xnu-517.obj~1/RELEASE_PPC 
  Power Macintosh powerpc
ppc7450
/bin:/sbin:/usr/bin:/usr/sbin

### wireless driver files installed

drwxr-xr-x   3 rodney  wheel     102  3 Nov 17:30 SigMeter.app
drwxr-xr-x    3 root  wheel   102  3 Nov 17:30 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 25 Sep 10:52 IOPCCardFamily.kext
drwxr-xr-x    3 root  wheel   102 30 Oct 12:44 AppleAirPort.kext
drwxr-xr-x    3 root  wheel   102 25 Sep 11:13 AppleAirPort2.kext
drwxr-xr-x    3 root  wheel   102 25 Sep 11:19 AppleAirPortFW.kext
ls: /Library/PreferencePanes: No such file or directory
drwxr-xr-x   3 rodney  wheel   102  3 Nov 17:07 WirelessDriver 
PPane.prefPane
ls: /usr/local/bin: No such file or directory

### wirelesscard info

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=1<UP> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         ether 00:0a:95:d9:f7:ee
         media: autoselect (none) status: inactive
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 
100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX 
<full-duplex,hw-loopback> 1000baseTX <full-duplex> 1000baseTX 
<full-duplex,hw-loopback> 1000baseTX <full-duplex,flow-control> 
1000baseTX <full-duplex,flow-control,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::20a:95ff:fef3:9b73 prefixlen 64 scopeid 0x5
         inet 192.168.1.27 netmask 0xffffff00 broadcast 192.168.1.255
         ether 00:0a:95:f3:9b:73
         media: autoselect status: active
         supported media: autoselect
fw0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 4078
         tunnel inet  -->
         lladdr 00:0a:95:ff:fe:d9:f7:ee
         media: autoselect <full-duplex> status: inactive
         supported media: autoselect <full-duplex>

### wd command line tool status

/Users/rodney/Desktop/Troubleshooting Info.command: line 38: 
/usr/local/bin/WirelessConfig: No such file or directory
logout
[Process completed]