[Wirelessdriver-support] Wireless Card

[John B. <jbr...@ma...>]

This card works it is a Microsoft MN-520,  I haven't tested wep 
encryption but basic functionality is there.

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.8
BuildVersion:   6R73
Darwin P79776.local. 6.8 Darwin Kernel Version 6.8: Wed Sep 10 15:20:55 
PDT 2003; root:xnu/xnu-344.49.obj~2/RELEASE_PPC  Power Macintosh powerpc
ppc7450

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 Oct 28 21:34 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 Sep 10 17:49 IOPCCardFamily.kext

### wirelesscard info

     | |   |     |   "VersionOneInfo" = ("Microsoft","Wireless Notebook 
Adapter $
     | |   |   +-o pccard2d2,1@0,0  <class IOPCCard16Device>
     | |   |     |   "IOName" = "pccard2d2,1"
     | |   |       |   "IONameMatch" = 
("pccard156,2","pccard1eb,807","pccard274$
     | |   |       |   "IONameMatched" = "pccard2d2,1"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::20a:95ff:fec5:f4fc%en0 prefixlen 64 scopeid 0x4
         ether 00:0a:95:c5:f4:fc
         media: autoselect (none) status: inactive
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 
100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX 
<full-duplex,hw-loopback> 1000baseTX <full-duplex> 1000baseTX 
<full-duplex,hw-loopback> 1000baseTX <full-duplex,flow-control> 
1000baseTX <full-duplex,flow-control,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::250:f2ff:fec3:73b0%en1 prefixlen 64 scopeid 0x5
         inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
         ether 00:50:f2:c3:73:b0
         media: <unknown type> (DS11 <full-duplex>) status: active
         supported media: none manual autoselect DS1 <half-duplex> DS1 
<full-duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS5 
<full-duplex> DS11 <half-duplex> DS11 <full-duplex>

### wd command line tool status