[Wirelessdriver-support] Linksys WUS11 and mac os x 10 2 8 :yelp :)

[<rat...@ti...>]

Hi

I'm trying to connect a Linksys WUSB11 wireless card to an imac G4, running
os x.
After installing (no problems), and rebooting, nothing appears in the
control panel (wireless panel under other, nore en0 devices under network)

Any ideas ?

Arnout

This is the log :

Last login: Fri Oct 24 20:40:42 on ttyp1
/Volumes/WirelessDriver\ 1.0.0\ Beta\ 4/utilities/Troubleshooting\
Info.command; exit
Welcome to Darwin!
[Arnout-Marjan-Computer:~] snuffel% /Volumes/WirelessDriver\ 1.0.0\
Beta\ 4/utilities/Troubleshooting\ Info.command; exit
### kext versions

sudo: kmodstat: command not found
sudo: kmodstat: command not found

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.8
BuildVersion:   6R73
Darwin Arnout-Marjan-Computer.local. 6.8 Darwin Kernel Version 6.8: Wed
Sep 10 15:20:55 PDT 2003; root:xnu/xnu-344.49.obj~2/RELEASE_PPC  Power
Macintosh powerpc
ppc7450

### wireless driver files installed

drwxrwxrwx    3 root  wheel   102 Mar 20  2002 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 Sep 11 00:49 IOPCCardFamily.kext
drwxr-xr-x   3 root    admin     102 Mar 20  2002 WirelessDriver
PPane.prefPane
2003-10-24 20:42:10.088 defaults[566]
The domain/default pair of (loginwindow,
AutoLaunchedApplicationDictionary) does not exist

### wirelesscard info


### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::203:93ff:fe84:b648%en0 prefixlen 64 scopeid 0x4
         ether 00:03:93:84:b6:48
         media: autoselect (none) status: inactive
         supported media: none autoselect 10baseT/UTP <half-duplex>
10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback>
100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX
<full-duplex,hw-loopback>

### wd command line tool status

/Volumes/WirelessDriver 1.0.0 Beta 4/utilities/Troubleshooting
Info.command: WirelessConfig: command not found
logout
[Process completed]