[Wirelessdriver-support] help with a wireless card and your driver

[Seth K. <se...@um...>]

i am trying (and trying and trying) to use the belkin wireless pc card 
f5d6020 ver.2 on my PB g3 firewire running OS X 10.6.2. I have tried 
the installer and the card comes up on my top bar.  the preference 
'wireless config' shows up in system prefs.  however the selection 
'en1' does not show up as a port i can select.  i have tried running 
the text you show in my terminal and i still get no luck.  even after 
reboot.  i have tried installing, rebooting, downloading a new one, 
reinstalling, rebooting etc.  i have tried deleting the .ktext files 
like it was suggested.  can you help me out ( i am pretty tech savy, 
but some of the terminal commands are over my head)  is there a way i 
can get this card to work?  it is in your supported list.

thanks a lot for your help...

seth

i have run the troubleshooter and got the following:



Last login: Mon Sep  8 23:32:16 on console
/Volumes/WirelessDriver\ beta\ 5.1/Utilities/Troubleshooting\ 
Info.command; exit
Welcome to Darwin!
[Seth-Kleinglasss-Computer:~] seth% /Volumes/WirelessDriver\ beta\ 
5.1/Utilities/Troubleshooting\ Info.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.6
BuildVersion:   6L60
Darwin Seth-Kleinglasss-Computer.local. 6.6 Darwin Kernel Version 6.6: 
Thu May  1 21:48:54 PDT 2003; root:xnu/xnu-344.34.obj~1/RELEASE_PPC  
Power Macintosh powerpc
ppc750

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 Sep  8 23:13 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 Sep  9  2001 IOPCCardFamily.kext

### wirelesscard info

     | |             "VersionOneInfo" = 
("Belkin","11Mbps-Wireless-Notebook-Netw$
     | |       +-o pccard1bf,3302@0,0  <class IOPCCard16Device>
     | |             "IOName" = "pccard1bf,3302"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::230:65ff:feb0:5ad0%en0 prefixlen 64 scopeid 0x4
         inet 192.168.2.31 netmask 0xffffff00 broadcast 192.168.2.255
         ether 00:30:65:b0:5a:d0
         media: autoselect (100baseTX <full-duplex>) status: active
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <half-duplex,hw-loopback> 10baseT/UTP <full-duplex> 
10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX 
<half-duplex,hw-loopback> 100baseTX <full-duplex> 100baseTX 
<full-duplex,hw-loopback>

### wd command line tool status

/Volumes/WirelessDriver beta 5.1/Utilities/Troubleshooting 
Info.command: WirelessConfig: command not found
logout
[Process completed]


============================================

                         _o       /
                       `\<,      /
                      0/ 0    /     \e/
    -o            _o       /         M                    Seth R. 
Kleinglass
   `\<,           `\<,    /          `\,                     
se...@um...
   O/ O         O/ O  /          O/ O                     734.516.3553

Werks Design Team * Ann Arbor, MI
============================================