[Wirelessdriver-support] Installer will not function

[Daniel H. <sa...@be...>]

I was having trouble with a D-Link 650+ card. A friend of mine told me 
that it was not supported so I returned it and bought at Proxim Orinoco 
Silver. When I plugged that into my PB I could again not get the 
control panel for the card to respond at all. I ran your uninstaller 
script. Then I ran DiskFirstAid. After a restart I tried to reinstall 
the software. Unfortunately it allways hangs up right after I push 
install. I was able to install the individual components ConfigApps and 
PrefPanes but the final component WirelessDriver give the following 
issue. I get past the login then the first time I hit the "choose your 
drive screen" my HD is red. I back up and try again it lights up green. 
Then I continue and hit install. After a few seconds the blue bar stops 
advancing and the program tells me an error has occurred. It does not 
say which one. Please for pity's sake help me. I am desperate to get 
this to work. Anything useful will result in copious amounts of 
gratitude.

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.6
BuildVersion:   6L60
Darwin CyberSimo.local. 6.6 Darwin Kernel Version 6.6: Thu May  1 
21:48:54 PDT 2003; root:xnu/xnu-344.34.obj~1/RELEASE_PPC  Power 
Macintosh powerpc
ppc750

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 May  2 01:03 IOPCCardFamily.kext
drwxr-xr-x   3 root      admin   102 Aug 29 18:48 WirelessDriver 
PPane.prefPane

### wirelesscard info

     | |             "VersionOneInfo" = ("Agere Systems","Wireless PC 
Card Model$
     | |       +-o pccard156,3@0,0  <class IOPCCard16Device>
     | |             "IOName" = "pccard156,3"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::250:e4ff:fed0:d27f%en0 prefixlen 64 scopeid 0x4
         inet 192.168.0.102 netmask 0xffffff00 broadcast 192.168.0.255
         ether 00:50:e4:d0:d2:7f
         media: autoselect (100baseTX <full-duplex>) status: active
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX 
<full-duplex>

### wd command line tool status

/Volumes/WirelessDriver beta 5.1/Utilities/Troubleshooting 
Info.command: WirelessConfig: command not found
logout

--
Daniel Hillesheim
sa...@be...