[Wirelessdriver-support] Melco WLI-CB-B11 supported?

[Keiji G. <kap...@av...>]

Hi,

A friend of mine just gave me a wireless LAN PC Card called
Melco WLI-CB-B11. I tried to use it on my PB G3 (firewire)
with your driver, but EN1/EN2 was not showed up. The
card was not listed in the list of supported cards, so,
my assumption was I could not use it; however, I would
like to know whether it is impossible to suppor the card
or you might eventually support it in the future.

The result of Troubleshooting Info is as follow:

+++++
### system info

ProductName:    Mac OS X
ProductVersion: 10.2.6
BuildVersion:   6L60
Darwin Macintosh.local. 6.6 Darwin Kernel Version 6.6: Thu May  1
21:48:54 PDT 2003; root:xnu/xnu-344.34.obj~1/RELEASE_PPC  Power
Macintosh powerpc
ppc750

### wireless driver files installed

drwxr-xr-x    3 root      wheel   102 Aug 21 04:18 WirelessDriver.kext
drwxr-xr-x    3 root      wheel   102 May  2 14:03 IOPCCardFamily.kext

### wirelesscard info

    | |             "VersionOneInfo" = ("Realtek","Rtl8139")

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
        inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::230:65ff:fe74:6f1e%en0 prefixlen 64 scopeid 0x4
        inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
        ether 00:30:65:74:6f:1e
        media: autoselect (100baseTX <full-duplex>) status: active
        supported media: none autoselect 10baseT/UTP <half-duplex>
10baseT/UTP <half-duplex,hw-loopback> 10baseT/UTP <full-duplex>
10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX
<half-duplex,hw-loopback> 100baseTX <full-duplex> 100baseTX
<full-duplex,hw-loopback>

### wd command line tool status

/Volumes/WirelessDriver beta 5.1/Utilities/Troubleshooting Info.command:
WirelessConfig: command not found
logout
[Process completed]
+++++

Thank you very much in advance.

-keiji