[Wirelessdriver-support] what if ioreg says "no-cis"?

[Rob W. <ro...@wo...>]

I'm trying to get a NetGear MA521 working with the 5.1b5 software, on 
a Pismo G3 powerbook running osX 10.2.6.

Installation of wd seems to go okay, but I see no additional 
interfaces via the network prefpane or when running ifconfig.

The troubleshooting script (see below) indicates that ioreg sees this 
card as "pccard-no-cis", which doesn't sound so good... I have a 
sneaking suspicion that "no-cis" is trying to signify "no Card 
Identification String".

Can anyone offer any advice?
Anyone got this particular card working with WD?

AtDhVaAnNkCsE!
rob



troubleshooting script output:
======
### system info

ProductName:    Mac OS X
ProductVersion: 10.2.6
BuildVersion:   6L60
Darwin ppcg3.local. 6.6 Darwin Kernel
Version 6.6: Thu May  1 21:48:54 PDT 2003;
root:xnu/xnu-344.34.obj~1/RELEASE_PPC  Power Macintosh
powerpc ppc750

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 Jul 27 18:47 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 May  2 01:03 IOPCCardFamily.kext
ls: /Library/PreferencePanes: No such file or directory

### wirelesscard info

     | |       +-o pccard-no-cis@0,0  <class IOPCCard16Device>
     | |             "IOName" = "pccard-no-cis"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::250:e4ff:fed0:fb1c%en0 prefixlen 64 scopeid 0x4
         inet 192.168.0.3 netmask 0xffffff00 broadcast 192.168.0.255
         ether 00:50:e4:d0:fb:1c
         media: autoselect (100baseTX <full-duplex>) status: active
         supported media: none autoselect 10baseT/UTP
<half-duplex> 10baseT/UTP <full-duplex> 100baseTX
<half-duplex> 100baseTX <full-duplex>

### wd command line tool status

/Volumes/WirelessDriver beta
5.1/Utilities/Troubleshooting Info.command:
WirelessConfig: command not found
logout