[Wirelessdriver-support] Trying to get Seimens Speedstream Card to work

[Sylvia W. <sy...@wi...>]

I am trying to get a Seimens Speedstream, Model SS1021 to work on a 
Wall Street Powerbook.  Previously I had an Orinoco Gold working under 
this driver and when it died I switched to a Cisco Aeronet Card which 
has it's own driver in OSX.

I have Unistalled and re-installed the driver and when I go to Network 
Preferences, the en(1) connection is grayed out when showing the 
network port configurations.  It is also worth noting that I never see 
a light in this card when it is inserted (it has Power and ACT lights). 
  The Card info on the PC Card menu in OSX shows 'Texas InstrumentS' on 
the first line, and 'ACX100 CaraBus Model Board' on the second line, 
both of which are grayed out.  'Eject Card' is on the third line and it 
is an active selection.

Any help will be greatly appreciated!

Thanks,
Kyle Wilkie

Here is the info from the troubleshooting script:

Last login: Mon Jul 21 17:46:41 on console
/Volumes/WirelessDriver\ beta\ 5.1/Utilities/Troubleshooting\ 
Info.command; exit
Welcome to Darwin!
[Kyle-Wilkies-Computer:~] sylviawilkie% /Volumes/WirelessDriver\ beta\ 
5.1/Utilities/Troubleshooting\ Info.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.6
BuildVersion:   6L60
Darwin Kyle-Wilkies-Computer.local. 6.6 Darwin Kernel Version 6.6: Thu 
May  1 21:48:54 PDT 2003; root:xnu/xnu-344.34.obj~1/RELEASE_PPC  Power 
Macintosh powerpc
ppc750

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 Jul 21 17:38 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 May  2 00:03 IOPCCardFamily.kext

### wirelesscard info

     |       |   |   "VersionOneInfo" = ("Texas InstrumentS","ACX100 
CaraBus Mod$
     |     +-o pccard@13  <class IOPCIDevice>
     |     | |   "device_type" = <"pccard">
     |     | |   "name" = <"pccard">
     |     +-o pccard@13,1  <class IOPCIDevice>
     |       |   "device_type" = <"pccard">
     |       |   "name" = <"pccard">

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::205:2ff:fe13:8eef%en0 prefixlen 64 scopeid 0x4
         ether 00:05:02:13:8e:ef
         media: autoselect (none) status: inactive
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX 
<full-duplex>

### wd command line tool status

/Volumes/WirelessDriver beta 5.1/Utilities/Troubleshooting 
Info.command: WirelessConfig: command not found
logout
[Process completed]