[Wirelessdriver-support] can't get en1 or en2 in network prefs

[b p <ani...@ya...>]

well, i was able to sort out my IOPCCardFamily.kext
issue with Pacifist and my tibook os x disc. 

is this the correct ver for os x 10.2.6?
Index Refs Address    Size       Wired      Name
(Version) <Linked Against>
   60    0 0x14f88000 0x20000    0x1f000   
com.apple.iokit.IOPCCardFamily (1.2.1)

by card now shows up in the upper right taskbar area,
however, i still cannot get en1 or en2 options under
the network prefs window. 

i'm not sure if my card, the proxim orinoco silver
802.11a/b combo card is the same orinoco that's
supported by the driver. as either this card has gone
thru many manufacturers or many companies make a card
by this name?

my network prefs only show modem/built in
ethernet/airport

my system is a rev 3 Titanium 15" G4 1GHz powerbook w/
built in wireless. however, the range sucks, so i'm
trying to get this 3rd party card to work. 

I've tried removing the kext cache files and
rebooting. uninstalling/reinstalling and rebooting.
rebooting with card in, rebooting with card out.
copying the files over by hand when they didn't
install right (WirelessDriver.kext, WirelessConfig). 
blowing everything away, reboot, reinstall, reboot. 

the funky thing is the IOName of the card when i do:
ioreg -l, i get "ethernet" for the IOName

   | |       +-o ethernet@0  <class IOCardBusDevice>
    | |           {
    | |             "name" = "ethernet"
    | |             "IOChildIndex" = 0
    | |             "VersionOneInfo" = ("Atheros
Communications, Inc.","AR5001-0000-0000","Wireless LAN
Reference Card","00")
    | |             "subsystem-vendor-id" = <00001b47>
    | |             "class-code" = <00020000>
    | |             "reg" = <00010000>
    | |             "compatible" =
<"pci1b47,aa00","pci168c,12","pciclass,020000">
    | |             "IOInterruptSpecifiers" =
(<00000000>)
    | |             "Power Management private data" =
"{ this object = 02279900, interested driver $
    | |             "IODeviceMemory" =
(({"length"=65536,"address"=18446744071830568960}))
    | |             "vendor-id" = <0000168c>
    | |             "device-id" = <00000012>
    | |             "revision-id" = <00000001>
    | |             "subsystem-id" = <0000aa00>
    | |             "Power Management protected data"
= "{ theNumberOfPowerStates = 3, version 1, p$
    | |             "assigned-addresses" =
<0201001000000000900100000000000000010000>
    | |             "IOInterruptControllers" =
("IOPCCardInterruptController00001a00")
    | |             "IOGeneralInterest" =
("_IOServiceInterestNotifier is not serializable")
    | |             "FunctionNumber" = 0
    | |             "SocketNumber" = 0
    | |             "IOName" = "ethernet"
    | |           }


anyway, here's the output of the troubleshooting
script:

/Volumes/WirelessDriver\ beta\
5.1/Utilities/Troubleshooting\ Info.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.6
BuildVersion:   6L60
Darwin Computer.local. 6.6 Darwin Kernel Version 6.6:
Thu May  1 21:48:54 PDT 2003;
root:xnu/xnu-344.34.obj~1/RELEASE_PPC  Power Macintosh
powerpc
ppc7450

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 Jul  4 01:11
WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 Sep  9  2001
IOPCCardFamily.kext

### wirelesscard info

    | |             "VersionOneInfo" = ("Atheros
Communications, Inc.","AR5001-0000-0000","Wireless$

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu
16384
        inet6 ::1 prefixlen 128 
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
        inet 127.0.0.1 netmask 0xff000000 
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0:
flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST>
mtu 1500
        inet6 fe80::203:93ff:fed2:d04a%en0 prefixlen
64 scopeid 0x4 
        inet 192.168.10.5 netmask 0xffffff00 broadcast
192.168.10.255
        ether 00:03:93:d2:d0:4a 
        media: autoselect (100baseTX <full-duplex>)
status: active
        supported media: none autoselect 10baseT/UTP
<half-duplex> 10baseT/UTP <half-duplex,hw-loopback>
10baseT/UTP <full-duplex> 10baseT/UTP
<full-duplex,hw-loopback> 100baseTX <half-duplex>
100baseTX <half-duplex,hw-loopback> 100baseTX
<full-duplex> 100baseTX <full-duplex,hw-loopback>
1000baseTX <full-duplex> 1000baseTX
<full-duplex,hw-loopback> 1000baseTX
<full-duplex,flow-control> 1000baseTX
<full-duplex,flow-control,hw-loopback>
en1:
flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST>
mtu 1500
        inet6 fe80::230:65ff:fe0b:62a%en1 prefixlen 64
scopeid 0x5 
        ether 00:30:65:0b:06:2a 
        media: autoselect (<unknown type>) status:
inactive
        supported media: autoselect

### wd command line tool status

/Volumes/WirelessDriver beta
5.1/Utilities/Troubleshooting Info.command:
WirelessConfig: command not found
logout


Any help would be greatly appreciated!
And any pointers to where all the driver files are
supposed to go would greatly help too, in case I
missed putting one of them in it's place.

thanks!!



__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com