[Wirelessdriver-support] Trouble Re-Installing Wireless Driver, Minor Assistance Necessary

[Mandela G. <mk...@ri...>]

I'm having trouble with the WirelessDriver Beta 5-1 package on OS X  
10.2.6.  I installed the package some time ago, and never got it to  
work, so I tried again this week.  It still didnt seem to work, so I  
ran the un-installer script, and then tried to re-install.  however,  
now when I try to re-install, the installer starts, and it prepares to  
install, then it says "There were errors, it cannot be installed."  I'm  
a little baffled.  Can someone give me a tip?  The trouble
shoot script yields the following
________________________________________________________________________ 
______________

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.6
BuildVersion:   6L60
Darwin Oasis.local. 6.6 Darwin Kernel Version 6.6: Thu May  1 21:48:54  
PDT 2003; root:xnu/xnu-344.34.obj~1/RELEASE_PPC  Power Macintosh powerpc
ppc7450

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 May  2 01:03 IOPCCardFamily.kext

### wirelesscard info

     | |             "VersionOneInfo" = ("D","Link DWL-650 11Mbps WLAN  
Card","Version 01.02","")
     | |       +-o pccard156,2@0,0  <class IOPCCard16Device>
     | |             "IOName" = "pccard156,2"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::20a:27ff:fe68:71b4%en2 prefixlen 64 scopeid 0x4
         ether 00:0a:27:68:71:b4
         media: autoselect <full-duplex> status: inactive
         supported media: autoselect <full-duplex>
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::20a:95ff:fe68:71b4%en0 prefixlen 64 scopeid 0x5
         ether 00:0a:95:68:71:b4
         media: autoselect (none) status: inactive
         supported media: none autoselect 10baseT/UTP <half-duplex>  
10baseT/UTP <half-duplex,hw-loopback> 10baseT/UTP <full-duplex>  
10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX  
<half-duplex,hw-loopback> 100baseTX <full-duplex> 100baseTX  
<full-duplex,hw-loopback> 1000baseTX <full-duplex> 1000baseTX  
<full-duplex,hw-loopback> 1000baseTX <full-duplex,flow-control>  
1000baseTX <full-duplex,flow-control,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::230:65ff:fe0a:b6e3%en1 prefixlen 64 scopeid 0x6
         inet 192.168.1.100 netmask 0xffffff00 broadcast 192.168.1.255
         ether 00:30:65:0a:b6:e3
         media: autoselect status: active
         supported media: autoselect

### wd command line tool status

/Volumes/WirelessDriver beta 5.1/Utilities/Troubleshooting  
Info.command: WirelessConfig: command not found
logout
[Process completed]