[Wirelessdriver-support] Ambient trouble

[John S. <joh...@ya...>]

Hi there--

I've installed the driver, rebooted my system, the
general "help me!" stuff from the FAQ, including
editing the Info.plist, etc, but I can't seem to get
it working at all.

Does it just not work with the Netgear driver?

Here's the system information.

Thanks!

John


### system info

ProductName:    Mac OS X
ProductVersion: 10.2.5
BuildVersion:   6L29
Darwin Computer.local. 6.5 Darwin Kernel Version 6.5:
Mon Apr  7 17:05:38 PDT 2003;
root:xnu/xnu-344.32.obj~1/RELEASE_PPC  Power Macintosh
powerpc
ppc7400

### wireless driver files installed

drwxr-xr-x   3 root     wheel         102 May 23 13:11
WirelessDriver.kext
drwxr-xr-x   3 root     wheel         102 Apr  9 13:13
IOPCCardFamily.kext

### wirelesscard info

    | |             "VersionOneInfo" = ("NETGEAR
MA401RA Wireless PC","Card","ISL37$
    | |       +-o pccardb,7300@0,0  <class
IOPCCard16Device>
    | |             "IOName" = "pccardb,7300"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu
16384
        inet6 ::1 prefixlen 128 
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
        inet 127.0.0.1 netmask 0xff000000 
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0:
flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST>
mtu 1500
        inet6 fe80::203:93ff:fe01:508a%en0 prefixlen
64 scopeid 0x4 
        inet 192.168.0.104 netmask 0xffffff00
broadcast 192.168.0.255
        ether 00:03:93:01:50:8a 
        media: autoselect (100baseTX <full-duplex>)
status: active
        supported media: none autoselect 10baseT/UTP
<half-duplex> 10baseT/UTP <half-duplex,hw-loopback>
10baseT/UTP <full-duplex> 10baseT/UTP
<full-duplex,hw-loopback> 100baseTX <half-duplex>
100baseTX <half-duplex,hw-loopback> 100baseTX
<full-duplex> 100baseTX <full-duplex,hw-loopback>

### wd command line tool status

2003-05-23 13:40:05.117 WirelessConfig[739]
Iterations: 0
WirelessDriver: Couldn't find a WirelessDriver service
in registry - is the card loaded?
Usage - WirelessConfig [-showstatus] or WirelessConfig
[-showstatus] <-netname <network>> [-wepkey <key>]
[-keyslot <slot>]
 -netname <name>     Sets the network name - enclose
in double quotes
                      if your network contains a
space.

 -wepkey <hex key>   Sets your network key, if ommited
the network is
                      assumed to not have wep.

 -keyslot <[1-4]>    Sets which keyslot to have your
key in. If
                      ommited keyslot 1 is assumed.

 -status             Prints out the network
information, includes
                      signal strength.

 -writeprefs         Writes out the options to the
preference file in                     
~/Library/Preferences/org.noncontinuous.wirelessdriver

With no options set or just the status, WirelessConfig
will look for the preferences made by the preference
pane in ~/Library/Preferences/org.noncontinuous.WirelessDriver.

__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com