[Wirelessdriver-support] Config Problems! Please help!

[Luman, J. A <JA...@mi...>]

I cannot get a signal from my Airport with the Wireless Driver. Please =
help.

I have a PB Wallstreet G3 running OS 10.2.6 with a Belkin F5D6020 ver.2 =
wireless card and a Graphite Airport. I have downloaded the wireless =
driver and another driver that gave me access to EN1 in the Network =
Prefs. I have tried every configuration; manually, DHCP with IP, and =
DHCP. I also have reset my Airport by plugging strait into it with an =
Ethernet cable and retrieved the IP address and name of the Airport. =
Nothing seems to work. My troubleshooting script info is below. Thanks.

Josh Luman

Last login: Wed May 14 21:16:00 on console
/Applications/Troubleshooting\ Info.command; exit
Welcome to Darwin!
[Josh-Lumans-Computer:~] joshluman% /Applications/Troubleshooting\
Info.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.6
BuildVersion:   6L60
Darwin Josh-Lumans-Computer.local. 6.6 Darwin Kernel Version 6.6: Thu =
May  1
21:48:54 PDT 2003; root:xnu/xnu-344.34.obj~1/RELEASE_PPC  Power =
Macintosh
powerpc
ppc750

### wireless driver files installed

drwxr-xr-x    3 root      wheel   102 May 13 17:14 =
AtmelWirelessDriver.kext
drwxr-xr-x    3 root      wheel   102 May 13 19:55 WirelessDriver.kext
drwxr-xr-x    3 root      wheel   102 May  2 00:03 IOPCCardFamily.kext
drwxr-xr-x   3 joshluma  staff   102 May 13 19:54 WirelessDriver
PPane.prefPane

### wirelesscard info

    |     | |   |   "VersionOneInfo" =3D
("Belkin","11Mbps-Wireless-Notebook-Network-Adapter")
    |     +-o pccard@13  <class IOPCIDevice>
    |     | |   "device_type" =3D <"pccard">
    |     | |   "name" =3D <"pccard">
    |     | | +-o pccard1bf,3302@0,0  <class IOPCCard16Device>
    |     | |   |   "IOName" =3D "pccard1bf,3302"
    |     | |     |   "IONameMatch" =3D =
("pccard1bf,b301","pccard1bf,3302")
    |     | |     |   "IONameMatched" =3D "pccard1bf,3302"
    |     +-o pccard@13,1  <class IOPCIDevice>
    |       |   "device_type" =3D <"pccard">
    |       |   "name" =3D <"pccard">

### network info

lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
        inet 127.0.0.1 netmask 0xff000000
gif0: flags=3D8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=3D0<> mtu 1280
en0: flags=3D8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::205:2ff:fe01:e85b%en0 prefixlen 64 scopeid 0x4
        ether 00:05:02:01:e8:5b
        media: autoselect (none) status: inactive
        supported media: none autoselect 10baseT/UTP <half-duplex>
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX =
<full-duplex>
en1: flags=3D8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::230:bdff:fed0:186e%en1 prefixlen 64 scopeid 0x5
        ether 00:30:bd:d0:18:6e
        media: autoselect (none) status: inactive
        supported media: none manual autoselect DS1 <half-duplex> DS1
<full-duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS5
<full-duplex> DS11 <half-duplex> DS11 <full-duplex>
ppp0: flags=3D8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
        inet 12.83.150.249 --> 199.69.117.12 netmask 0xff000000

### wd command line tool status

/Applications/Troubleshooting Info.command: WirelessConfig: command not
found
logout