[Wirelessdriver-support] New problem with WirelessConfig1.0.0b5 and Jaguar

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

On Fri, 2 May 2003 bu...@po... wrote:

Good afternoon again. Since my email yesterday, I have done a complete 
(clean) install of OS X 10.2 onto the Wall Street Powerbook. I attempted 
to reinstall 1.0.0b4, which resulted in the Installer reporting "Errors 
in the install, software not installed, try again."

So I tried installing 1.0.0b5. The Installer reported the software as 
successfully installed. 
I have the same problems as I did yesterday: 

The fields in the WirelessConfig pane of System Preferences are greyed out 
and non-selectable. The Installer did not report an error during install. 
I've rebooted the system since installing 1.0.0b5.

There is no longer an option for EN1 in the Network pane of System 
Preferences.

The status lights on the Lucent card do not flicker now, as they did
before the upgrade (and the subsequent reinstall) yesterday.

I enclose the output of the troubleshooting script, and I'd appreciate 
any advice the list can offer.  

Thanks,
Steve Burnett
burnett @ pobox.com
----------
Last login: Sat May  3 13:17:24 on console
Welcome to Darwin!
/Volumes/WirelessDriver\ beta\ 5.1/Utilities/Troubleshooting\ 
Info.command; exit
[wallstreetosx:~] steveburnett% /Volumes/WirelessDriver\ beta\ 
5.1/Utilities/Troubleshooting\ Info.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.2
BuildVersion:   6C115
Darwin wallstreetosx.local. 6.0 Darwin Kernel Version 6.0: Sat Jul 27 
13:18:52 PDT 2002; root:xnu/xnu-344.obj~1/RELEASE_PPC  Power Macintosh 
powerpc
ppc750

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 Jul 27  2002 IOPCCardFamily.kext
ls: /Library/PreferencePanes: No such file or directory
2003-05-03 13:25:48.328 defaults[748] 
The domain/default pair of (loginwindow, 
AutoLaunchedApplicationDictionary) does not exist

### wirelesscard info

    |     |         "VersionOneInfo" = ("Lucent 
Technologies","WaveLAN/IEEE","V$
    |     +-o pccard@13  <class IOPCIDevice>
    |     | |   "device_type" = <"pccard">
    |     | |   "name" = <"pccard">
    |     |   +-o pccard156,2@1,0  <class IOPCCard16Device>
    |     |         "IOName" = "pccard156,2"
    |     +-o pccard@13,1  <class IOPCIDevice>
    |       |   "device_type" = <"pccard">
    |       |   "name" = <"pccard">

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128 
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
        inet 127.0.0.1 netmask 0xff000000 
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::205:2ff:fe7b:be91%en0 prefixlen 64 scopeid 0x4 
        inet 10.0.1.20 netmask 0xffffff00 broadcast 10.0.1.255
        ether 00:05:02:7b:be:91 
        media: autoselect (10baseT/UTP <half-duplex>) status: active
        supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX <full-duplex>

### wd command line tool status

/Volumes/WirelessDriver beta 5.1/Utilities/Troubleshooting Info.command: 
WirelessConfig: command not found
logout
[Process completed] 
----------

 > Good afternoon:
> 
> I had 1.0.0b4 running with Jaguar (10.2.1 to 10.2.5) on a Wall Street 
> Powerbook and a Lucent Orinoco Gold card fine from Oct to yesterday. 
> Yesterday I upgraded to 1.0.0b5 and the app fails to work at all: the 
> fields in the WirelessConfig are greyed out and non-selectable. The 
> Installer did not report an error during install. I've rebooted the 
> system since installing 1.0.0b5. 
> 
> There is no longer an option for EN1 in the Network system preferences 
> pane. 
> 
> The status lights on the Lucent card do not flicker now, as they did 
> before the upgrade yesterday. 
> 
> I have a grey and a white Apple Airport basestation, neither has WEP 
> encryption turned on. No problem conencting to them with 1.0.0b4 up 
> thorugh yesterday.
> 
> I've read the FAQ, and am not sure what to do now. I'd appreciate any 
> suggestions you might have. 
> 
> I include the output of the troubleshooting script below. 
> ----begin-----------------
> Last login: Fri May  2 14:11:22 on console
> /Volumes/WirelessDriver\ beta\ 5.1/Utilities/Troubleshooting\ 
> Info.command; exit
> Welcome to Darwin!
> [wallstreetosx:~] mikejones% /Volumes/WirelessDriver\ beta\ 
> 5.1/Utilities/Troubleshooting\ Info.command; exit
> 
> ### system info
> 
> ProductName:    Mac OS X
> ProductVersion: 10.2.5
> BuildVersion:   6L29
> Darwin wallstreetosx.local. 6.5 Darwin Kernel Version 6.5: Mon Apr  7 
> 17:05:38 PDT 2003; root:xnu/xnu-344.32.obj~1/RELEASE_PPC  Power Macintosh 
> powerpc
> ppc750
> 
> ### wireless driver files installed
> 
> drwxr-xr-x    3 root  wheel   102 May  2 14:14 WirelessDriver.kext
> drwxr-xr-x    3 root  wheel   102 Apr  9 13:13 IOPCCardFamily.kext
> ls: /Library/PreferencePanes: No such file or directory
> 
> ### wirelesscard info
> 
>     |     | |       "VersionOneInfo" = ("Lucent 
> Technologies","WaveLAN/IEEE","V$
>     |     +-o pccard@13  <class IOPCIDevice>
>     |     | |   "device_type" = <"pccard">
>     |     | |   "name" = <"pccard">
>     |     | | +-o pccard156,2@0,0  <class IOPCCard16Device>
>     |     | |       "IOName" = "pccard156,2"
>     |     +-o pccard@13,1  <class IOPCIDevice>
>     |       |   "device_type" = <"pccard">
>     |       |   "name" = <"pccard">
> 
> ### network info
> 
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>         inet6 ::1 prefixlen 128 
>         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
>         inet 127.0.0.1 netmask 0xff000000 
> gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
> stf0: flags=0<> mtu 1280
> en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>         inet6 fe80::205:2ff:fe7b:be91%en0 prefixlen 64 scopeid 0x4 
>         ether 00:05:02:7b:be:91 
>         media: autoselect (none) status: inactive
>         supported media: none autoselect 10baseT/UTP <half-duplex> 
> 10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX <full-duplex>
> 
> ### wd command line tool status
> 
> /Volumes/WirelessDriver beta 5.1/Utilities/Troubleshooting Info.command: 
> WirelessConfig: command not found
> logout
> [Process completed] 
> ----end-------------------
> 
> thanks for your time,
> Steve Burnett
> 
> 
> 
> 
> 
> 

-- 
Steve Burnett    bu...@po...   http://www.pobox.com/~burnett/
System Administration Technical Documentation Information Retrieval