[Wirelessdriver-support] Problem with WirelessConfig1.0.0b5

[<bu...@po...>]

Good afternoon:

I had 1.0.0b4 running with Jaguar (10.2.1 to 10.2.5) on a Wall Street 
Powerbook and a Lucent Orinoco Gold card fine from Oct to yesterday. 
Yesterday I upgraded to 1.0.0b5 and the app fails to work at all: the 
fields in the WirelessConfig are greyed out and non-selectable. The 
Installer did not report an error during install. I've rebooted the 
system since installing 1.0.0b5. 

There is no longer an option for EN1 in the Network system preferences 
pane. 

The status lights on the Lucent card do not flicker now, as they did 
before the upgrade yesterday. 

I have a grey and a white Apple Airport basestation, neither has WEP 
encryption turned on. No problem conencting to them with 1.0.0b4 up 
thorugh yesterday.

I've read the FAQ, and am not sure what to do now. I'd appreciate any 
suggestions you might have. 

I include the output of the troubleshooting script below. 
----begin-----------------
Last login: Fri May  2 14:11:22 on console
/Volumes/WirelessDriver\ beta\ 5.1/Utilities/Troubleshooting\ 
Info.command; exit
Welcome to Darwin!
[wallstreetosx:~] mikejones% /Volumes/WirelessDriver\ beta\ 
5.1/Utilities/Troubleshooting\ Info.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.5
BuildVersion:   6L29
Darwin wallstreetosx.local. 6.5 Darwin Kernel Version 6.5: Mon Apr  7 
17:05:38 PDT 2003; root:xnu/xnu-344.32.obj~1/RELEASE_PPC  Power Macintosh 
powerpc
ppc750

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 May  2 14:14 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 Apr  9 13:13 IOPCCardFamily.kext
ls: /Library/PreferencePanes: No such file or directory

### wirelesscard info

    |     | |       "VersionOneInfo" = ("Lucent 
Technologies","WaveLAN/IEEE","V$
    |     +-o pccard@13  <class IOPCIDevice>
    |     | |   "device_type" = <"pccard">
    |     | |   "name" = <"pccard">
    |     | | +-o pccard156,2@0,0  <class IOPCCard16Device>
    |     | |       "IOName" = "pccard156,2"
    |     +-o pccard@13,1  <class IOPCIDevice>
    |       |   "device_type" = <"pccard">
    |       |   "name" = <"pccard">

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128 
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
        inet 127.0.0.1 netmask 0xff000000 
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::205:2ff:fe7b:be91%en0 prefixlen 64 scopeid 0x4 
        ether 00:05:02:7b:be:91 
        media: autoselect (none) status: inactive
        supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX <full-duplex>

### wd command line tool status

/Volumes/WirelessDriver beta 5.1/Utilities/Troubleshooting Info.command: 
WirelessConfig: command not found
logout
[Process completed] 
----end-------------------

thanks for your time,
Steve Burnett