Re: [Wirelessdriver-support] G3 Powerbook and Orinoco Gold

[Michael B. <mb...@zo...>]

On Sunday, February 16, 2003, at 02:55  PM, Ira Tackel wrote:
> I have installed the driver software, but it does not seem to=20
> recognize the Gold card at all. =A0In the Network Preferences, I don=92t=
=20
> even get the EN1 Option for setting up the network.
> What gives??
> Under OS9, the card worked perfectly.


Hello Ira. The Wireless Driver is a beautiful thing, once you get it=20
working  :0)
I have it working on essentially the same setup as you (Lombard PBG3).
But many have found, and described workarounds here, that the=20
installation process requires a little patience.

You may need to try any or all of the following:
1) Run the installer twice.
2) Check the FAQ (at the bottom), and be sure the permissions got set=20
right on the installed files, and that they are in the correct=20
locations. Email back if you're unsure how to do this.
3) Try logging out and back in, or even restarting.
4) Be sure the card is properly seated in the slot.

Apologies if these sound obvious, but I had to do some combination of=20
all of these, and then magically, finally, that en1 shows up and=20
everything is joy again!

Kind Regards,
--Michael