[Wirelessdriver-support] Compaq Card

[<Li...@ao...>]

Hi I am new to all this so please be kind in your replies.
I just bought a Compaq wireless card. (HNW-100) The IOXpert driver works with 
my card but I cannot justify adding another $20 to the cost of the card to 
make it work. The IOXpert driver purports to work with the Compaq WL100 & WL 
110, but it makes no mention of the card I have. 
Here is a copy of the troubleshooting script I ran. Please help me.

ProductName:     Mac OS X
ProductVersion: 10.2.3
BuildVersion:    6G30
Darwin achi.local. 6.3 Darwin Kernel Version 6.3: Sat Dec 14 03:11:25 PST 
2002; root:xnu/xnu-344.23.obj~4/RELEASE_PPC   Power Macintosh powerpc
ppc7450

### wireless driver files installed

drwxr-xr-x     3 root   wheel    102 Jan 19 20:45 WirelessDriver.kext
drwxr-xr-x     3 root   wheel    102 Nov   6 01:04 IOPCCardFamily.kext

### wirelesscard info

     | |          |    "VersionOneInfo" = ("Compaq","11Mbps Wireless PC Card
","Ver$
     | |        +-o pccard28a,2@0,0   <class IOPCCard16Device>
     | |          |    "IOName" = "pccard28a,2"
     | |            |    "IONameMatch" = 
("pccardb,7300","pccard89,1","pccard101,1$
     | |            |    "IONameMatched" = "pccard28a,2"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128 
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
         inet 127.0.0.1 netmask 0xff000000 
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::203:93ff:fedb:602c%en0 prefixlen 64 scopeid 0x4 
         ether 00:03:93:db:60:2c 
         media: autoselect (none) status: inactive
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <half-duplex,hw-loopback> 10baseT/UTP <full-duplex> 10baseT/UTP <
full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <
half-duplex,hw-loopback> 100baseTX <full-duplex> 100baseTX <
full-duplex,hw-loopback> 1000baseTX <full-duplex> 1000baseTX <
full-duplex,hw-loopback> 1000baseTX <full-duplex,flow-control> 1000baseTX <
full-duplex,flow-control,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::205:5dff:fed5:ff86%en1 prefixlen 64 scopeid 0x5 
         inet 192.168.1.102 netmask 0xffffff00 broadcast 192.168.1.255
         ether 00:05:5d:d5:ff:86 
         media: autoselect status: active
         supported media: autoselect

### wd command line tool status

/Volumes/WirelessDriver beta 5.1/Utilities/Troubleshooting Info.command: 
WirelessConfig: command not found
logout