[Wirelessdriver-support] Finally see en1, still no go. Please Help.

[wyldchyld <wyl...@zi...>]

I finally got the en1 to show up but it still doesn't work. Please help. Here's my troubleshooting results.

Last login: Sun Dec 22 05:33:08 on console
/misc/wirelessdriver/Utilities/Troubleshooting\ Info.command; exit
Welcome to Darwin!
[Wyld-Chylds-Computer:~] wyldchyld% /misc/wirelessdriver/Utilities/Troubleshooting\ Info.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.3
BuildVersion:   6G30
Darwin Wyld-Chylds-Computer.local. 6.3 Darwin Kernel Version 6.3: Sat Dec 14 03:11:25 PST 2002; root:xnu/xnu-344.23.obj~4/RELEASE_PPC  Power Macintosh powerpc
ppc750

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 Dec 15 17:28 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 Dec 14 18:23 IOPCCardFamily.kext
drwxr-xr-x   3 wyldchyl  admin   102 Dec 16 08:57 WirelessDriver PPane.prefPane

### wirelesscard info

    |     +-o pccard@13  <class IOPCIDevice>
    |     | |   "device_type" = <"pccard">
    |     | |   "name" = <"pccard">
    |     +-o pccard@13,1  <class IOPCIDevice>
    |       |   "device_type" = <"pccard">
    |       |   "name" = <"pccard">

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128 
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
        inet 127.0.0.1 netmask 0xff000000 
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
        tunnel inet  --> 
        ether 00:05:02:89:3e:a4 
        media: autoselect (<unknown type>)
        supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX <full-duplex>
ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1400
        inet 172.165.193.137 --> 67.209.0.55 netmask 0xffff0000 

### wd command line tool status

/misc/wirelessdriver/Utilities/Troubleshooting Info.command: WirelessConfig: command not found
logout
[Process completed]