[Wirelessdriver-support] new PBTi 867 having problems with b5.1 release

[Doug <do...@be...>]

I am unable to see the en1or a en2 port after running the installer and 
restarting several times.  This is the only version of wireless drivers 
I have tried. I have included the output from the terminal after 
running the troubleshooting script.  Thanks for your help.

Best regards,

Doug

Last login: Sun Dec 29 17:44:48 on console
/Volumes/WirelessDriver\ beta\ 5.1/Utilities/Troubleshooting\ 
Info.command; exit
Welcome to Darwin!
[Dougs-Computer:~] doug% /Volumes/WirelessDriver\ beta\ 
5.1/Utilities/Troubleshooting\ Info.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.3
BuildVersion:   6G30
Darwin Dougs-Computer.local. 6.3 Darwin Kernel Version 6.3: Sat Dec 14 
03:11:25 PST 2002; root:xnu/xnu-344.23.obj~4/RELEASE_PPC  Power 
Macintosh powerpc
ppc7450

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 Dec 29 16:42 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 Nov  6 01:04 IOPCCardFamily.kext

### wirelesscard info

     | |             "VersionOneInfo" = ("NETGEAR MA401RA Wireless 
PC","Card","I$
     | |       +-o pccardb,7300@0,0  <class IOPCCard16Device>
     | |             "IOName" = "pccardb,7300"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::203:93ff:fed9:ce4c%en0 prefixlen 64 scopeid 0x4
         inet 192.168.1.100 netmask 0xffffff00 broadcast 192.168.1.255
         ether 00:03:93:d9:ce:4c
         media: autoselect (100baseTX <full-duplex>) status: active
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <half-duplex,hw-loopback> 10baseT/UTP <full-duplex> 
10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX 
<half-duplex,hw-loopback> 100baseTX <full-duplex> 100baseTX 
<full-duplex,hw-loopback> 1000baseTX <full-duplex> 1000baseTX 
<full-duplex,hw-loopback> 1000baseTX <full-duplex,flow-control> 
1000baseTX <full-duplex,flow-control,hw-loopback>

### wd command line tool status

/Volumes/WirelessDriver beta 5.1/Utilities/Troubleshooting 
Info.command: WirelessConfig: command not found
logout
[Process completed]