[Wirelessdriver-support] Not able to connect

[Jonah L. W. <jon...@ma...>]

I configured my network panel and then checked the Network 
Configuration and it all seems to be correct, but I am still unable to 
connect. I am not sure my wireless card is fully supported. It is a 
MacWirless.com 802.11b Wireless PC Card PRISM 2.5 WLAN PC Card.

The results of running the troubleshooting script are as follows:

Last login: Sat Dec 28 19:14:26 on ttyp1
/Applications/Utilities/Wireless\ Utilities/Troubleshooting\ 
Info.command; exit
Welcome to Darwin!
[Chung-King-Express:~] jonahlee% /Applications/Utilities/Wireless\ 
Utilities/Troubleshooting\ Info.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.3
BuildVersion:   6G30
Darwin Chung-King-Express.local. 6.3 Darwin Kernel Version 6.3: Sat Dec 
14 03:11:25 PST 2002; root:xnu/xnu-344.23.obj~4/RELEASE_PPC  Power 
Macintosh powerpc
ppc7400

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 Dec 28 18:14 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 Nov  5 22:04 IOPCCardFamily.kext

### wirelesscard info

     | |         |   "VersionOneInfo" = ("11Mbps","Wireless LAN PC 
Card","Versio$
     | |       +-o pccard156,2@0,0  <class IOPCCard16Device>
     | |         |   "IOName" = "pccard156,2"
     | |           |   "IONameMatch" = 
("pccard156,2","pccard1eb,807","pccard274$
     | |           |   "IONameMatched" = "pccard156,2"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::220:a5ff:fe00:56%en1 prefixlen 64 scopeid 0x4
         inet 169.254.80.219 netmask 0xffff0000 broadcast 169.254.255.255
         ether 00:20:a5:00:00:56
         media: <unknown type> (DS11 <full-duplex>) status: active
         supported media: none manual autoselect DS1 <half-duplex> DS1 
<full-duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS5 
<full-duplex> DS11 <half-duplex> DS11 <full-duplex>
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::250:e4ff:feb9:db37%en0 prefixlen 64 scopeid 0x5
         ether 00:50:e4:b9:db:37
         media: autoselect (none) status: inactive
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX 
<full-duplex>

### wd command line tool status

/Applications/Utilities/Wireless Utilities/Troubleshooting 
Info.command: WirelessConfig: command not found
logout
[Process completed]

-Jonah Lee