Re: [Wirelessdriver-support] Connection Failure

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

You probably need to enter the correct DNS addresses into your Network 
preference pane. The card is recognized by the driver. The problem is 
with configuration of your network settings, or the wireless access 
point.

Y
On Monday, November 25, 2002, at 08:08  PM, Lydia chan wrote:

>
>
>
>
> ok so i ask again...i run the troubleshooting..and this is wha i got
> Welcome to Darwin!
> /Lydia/Troubleshooting\ Info.command; exit
> [localhost:~] lydiama% /Lydia/Troubleshooting\ Info.command; exit
>
> ### system info
>
> ProductName:    Mac OS X
> ProductVersion: 10.1.5
> BuildVersion:   5S66
> Darwin localhost 5.5 Darwin Kernel Version 5.5: Thu May 30 14:51:26 
> PDT 2002; root:xnu/xnu-201.42.3.obj~1/RELEASE_PPC  Power Macintosh 
> powerpc
> ppc7450
>
> ### wireless driver files installed
>
> drwxrwxrwx    3 root  wheel   264 Mar 20  2002 WirelessDriver.kext
> drwxr-xr-x    3 root  wheel   264 May 30 13:53 IOPCCardFamily.kext
> drwxr-xr-x   3 root  admin  264 Mar 20  2002 WirelessDriver 
> PPane.prefPane
>    {Path = "/Library/PreferencePanes/WirelessDriver PPane.prefPane/"; }
>
> ### wirelesscard info
>
>    | |         |   "VersionOneInfo" = ("The Linksys Group, 
> Inc.","Instant Wire$
>    | |           |   "VersionOneInfo" = ("The Linksys Group, 
> Inc.","Instant Wi$
>    | |       +-o pccard274,1613@0,0  <class IOPCCard16Device>
>    | |         |   "IOName" = "pccard274,1613"
>
> ### network info
>
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>        inet 127.0.0.1 netmask 0xff000000
> en0: flags=8822<BROADCAST,b6,SIMPLEX,MULTICAST> mtu 1500
>        ether 00:03:93:46:6c:94
>        media: autoselect (none) status: inactive
>        supported media: none autoselect 10baseT/UTP <half-duplex> 
> 10baseT/UTP <half-duplex,hw-loopback> 10baseT/UTP <full-duplex> 
> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 
> 100baseTX <half-duplex,hw-loopback> 100baseTX <full-duplex> 100baseTX 
> <full-duplex,hw-loopback> 1000baseTX <full-duplex> 1000baseTX 
> <full-duplex,hw-loopback> 1000baseTX <full-duplex,flow-control> 
> 1000baseTX <full-duplex,flow-control,hw-loopback>
> en1: flags=8863<UP,BROADCAST,b6,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>        inet 10.59.129.114 netmask 0xffffc000 broadcast 10.59.191.255
>        ether 00:06:25:16:c6:49
>        media: <unknown type> (DS11 <full-duplex>) status: active
>        supported media: none manual autoselect DS1 <half-duplex> DS1 
> <full-duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> 
> DS5 <full-duplex> DS11 <half-duplex> DS11 <full-duplex>
>
> ### wd command line tool status
>
> 2002-11-25 14:35:31.557 WirelessConfig[633] Iterations: 1
> Network Name: Accounting, successful: Y
> 2002-11-25 14:35:31.565 WirelessConfig[633] NO TO WEP
> Network Name: Accounting, successful: Y
> Status:
> Network: Accounting
> WEP Enabled:NO
> Signal Strength:45
> logout
>
>
>
> [Process completed]
>
> i cant surf on the brower..but the Link light is solid..whaz going on?
>
> _________________________________________________________________
> The new MSN 8: advanced junk mail protection and 2 months FREE* 
> http://join.msn.com/?page=features/junkmail
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: Get the new Palm Tungsten T 
> handheld. Power & Color in a compact size! 
> http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en
> _______________________________________________
> Wirelessdriver-support mailing list
> Wir...@li...
> https://lists.sourceforge.net/lists/listinfo/wirelessdriver-support