[Wirelessdriver-support] Still no luck on my EnGenius card

[Daniel G. <ag...@ma...>]

At this point I've tried everything I can think of to get my EnGenius 
card to work. I've installed and reinstalled the drivers several times 
including installing the files manually. I did a clean installation of 
10.2 and tried it on that. I've tested my pc card slot with a known 
good card (a sony memory stick adaptor) and have tried both an internal 
antenna card and an external antenna card with no luck. I've also tried 
installing on a Powerbook G4 800 with the same results. Never once have 
I seen the light turn on the card nor am I ever given an option in the 
network system preference to activate what would be en2 for me. Does 
anyone have any suggestions? At this point I'm considering returning 
the cards and living with my horrible airport range...

Thanks,
Dan


### system info

ProductName:    Mac OS X
ProductVersion: 10.2.2
BuildVersion:   6F21
Darwin galtsgulch.local. 6.2 Darwin Kernel Version 6.2: Tue Nov  5 
22:00:03 PST 2002; root:xnu/xnu-344.12.2.obj~1/RELEASE_PPC  Power 
Macintosh powerpc
ppc7450

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 Nov 25 11:20 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 Sep  9  2001 IOPCCardFamily.kext
ls: /Library/PreferencePanes: No such file or directory

### wirelesscard info


### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::203:93ff:fe1d:35c%en0 prefixlen 64 scopeid 0x4
         ether 00:03:93:1d:03:5c
         media: autoselect (none) status: inactive
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <half-duplex,hw-loopback> 10baseT/UTP <full-duplex> 
10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX 
<half-duplex,hw-loopback> 100baseTX <full-duplex> 100baseTX 
<full-duplex,hw-loopback> 1000baseTX <full-duplex> 1000baseTX 
<full-duplex,hw-loopback> 1000baseTX <full-duplex,flow-control> 
1000baseTX <full-duplex,flow-control,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::230:65ff:fe01:f5b3%en1 prefixlen 64 scopeid 0x5
         inet 10.0.1.3 netmask 0xffffff00 broadcast 10.0.1.255
         ether 00:30:65:01:f5:b3
         media: autoselect status: active
         supported media: autoselect

### wd command line tool status

/Volumes/WirelessDriver beta 5.1/Utilities/Troubleshooting 
Info.command: WirelessConfig: command not found
logout
[Process completed]