Re: [Wirelessdriver-support] I CAN NOT make my Orinoco Silver

[Scott M. D. <pn...@wo...>]

On Monday, November 25, 2002, at 10:11  AM, Robert Engstr=F6m wrote:
> In this case you have to try to reconfigure the settings. As I said in=20=

> my
> previous post in OS X it might be necessary to disable all ports=20
> except the one
> you want to use. Best is to use the different locations. To check if=20=

> you have a
> good connection to the WLan Open up System Preferences and click on=20
> the Wireless
> Prefpane and watch the Signal Strenght bar. Depending on how far you=20=

> are from the
> base station it is either short (far away from base station) or long=20=

> (close to
> base station) bar. The Network name should also be shown in the=20
> Wireless Prefpane
> if you can connect to the Wlan network.

Another reason for having only connection per Location is that having=20
Appletalk active on more than one active port causes problems.

****************************************
Scott M. Drummey
Point 'n Click Computing
member, Apple Consultant's Network
Authorized reseller for MadsonLine, Minolta-QMS, Dr. Bott
Authorized Repair Center for MCE Electronics

sm...@pn...  Ph: (603) 740-9479 Fax: (561) 760-0114