Re: [Wirelessdriver-support] I CAN NOT make my Orinoco Silver Card work w/ 10.2.2

[Steve J. (a. lathe.man) <lat...@ve...>]

I should have indicated I am using a Lucent (Orinoco) Residential Gateway
for my base station.

on 11/23/02 9:06 PM, Steve Jaynes at srj...@gt... wrote:

> I CAN NOT make my Orinoco Silver Card work w/ 10.2.2!
> 
> I've reinstalled, de-installed, manually checked for prefspanes
> locations, etc.  I've tried all the stuff I've read about for the last
> two weeks worth of Mailing List postings.  I'm stumped!
> 
> I get a signal, but it will not xmit or receive data.
> 
> I've double checked booting from OS 9.2.2 and everything works fine.
> 
> Bronze Keyboard (G3 SCSI) 400 MHz /384 MB RAM, etc.   HELP!!!
> 
> Please send replies via email. srj...@gt...
> 
> Here's my debug dump.
> 
> Last login: Sat Nov 23 20:39:47 on console
> Welcome to Darwin!
> /zz\ -\ DownLoads\ Folder/OS\ X\ Wireless\ DnLds/Troubleshooting\
> Info.command; exit
> [Sandi-Jayness-Computer:~] steven% /zz\ -\ DownLoads\ Folder/OS\ X\
> Wireless\ DnLds/Troubleshooting\ Info.command; exit
> 
> ### system info
> 
> ProductName:    Mac OS X
> ProductVersion: 10.2.2
> BuildVersion:   6F21
> Darwin Sandi-Jayness-Computer.local. 6.2 Darwin Kernel Version 6.2: Tue
> Nov  5 22:00:03 PST 2002; root:xnu/xnu-344.12.2.obj~1/RELEASE_PPC
> Power Macintosh powerpc
> ppc750
> 
> ### wireless driver files installed
> 
> drwxr-xr-x    3 root  wheel   102 Nov 22 22:20 WirelessDriver.kext
> drwxr-xr-x    3 root  wheel   102 Nov  5 22:04 IOPCCardFamily.kext
> ls: /Library/PreferencePanes: No such file or directory
>    {Hide = 0; Path = "/Library/PreferencePanes/WirelessDriver
> PPane.prefPane"; },
>    {Hide = 0; Path = "/Library/PreferencePanes/WirelessDriver
> PPane.prefPane"; }
> 
> ### wirelesscard info
> 
>    | |         |   "VersionOneInfo" = ("Lucent
> Technologies","WaveLAN/IEEE","V$
>    | |           |   "VersionOneInfo" = ("Lucent
> Technologies","WaveLAN/IEEE")
>    | |       +-o pccard156,2@0,0  <class IOPCCard16Device>
>    | |         |   "IOName" = "pccard156,2"
> 
> ### network info
> 
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>        inet6 ::1 prefixlen 128
>        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
>        inet 127.0.0.1 netmask 0xff000000
> gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
> stf0: flags=0<> mtu 1280
> en2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>        inet6 fe80::202:2dff:fe1e:5ed%en2 prefixlen 64 scopeid 0x4
>        inet 192.168.1.105 netmask 0xffffff00 broadcast 192.168.1.255
>        ether 00:02:2d:1e:05:ed
>        media: <unknown type> (DS11 <full-duplex>) status: active
>        supported media: none manual autoselect DS1 <half-duplex> DS1
> <full-duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS5
> <full-duplex> DS11 <half-duplex> DS11 <full-duplex>
> en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>        inet6 fe80::250:e4ff:fe7a:2f20%en0 prefixlen 64 scopeid 0x5
>        ether 00:50:e4:7a:2f:20
>        media: autoselect (none) status: inactive
>        supported media: none autoselect 10baseT/UTP <half-duplex>
> 10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX
> <full-duplex>
> 
> ### wd command line tool status
> 
> /zz - DownLoads Folder/OS X Wireless DnLds/Troubleshooting
> Info.command: WirelessConfig: command not found
> logout
> [Process completed]