[Wirelessdriver-support] I CAN NOT make my Orinoco Silver Card work w/ 10.2.2

[Steve J. <srj...@gt...>]

I CAN NOT make my Orinoco Silver Card work w/ 10.2.2!

I've reinstalled, de-installed, manually checked for prefspanes 
locations, etc.  I've tried all the stuff I've read about for the last 
two weeks worth of Mailing List postings.  I'm stumped!

I get a signal, but it will not xmit or receive data.

I've double checked booting from OS 9.2.2 and everything works fine.

Bronze Keyboard (G3 SCSI) 400 MHz /384 MB RAM, etc.   HELP!!!

Please send replies via email. srj...@gt...

Here's my debug dump.

Last login: Sat Nov 23 20:39:47 on console
Welcome to Darwin!
/zz\ -\ DownLoads\ Folder/OS\ X\ Wireless\ DnLds/Troubleshooting\ 
Info.command; exit
[Sandi-Jayness-Computer:~] steven% /zz\ -\ DownLoads\ Folder/OS\ X\ 
Wireless\ DnLds/Troubleshooting\ Info.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.2
BuildVersion:   6F21
Darwin Sandi-Jayness-Computer.local. 6.2 Darwin Kernel Version 6.2: Tue 
Nov  5 22:00:03 PST 2002; root:xnu/xnu-344.12.2.obj~1/RELEASE_PPC  
Power Macintosh powerpc
ppc750

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 Nov 22 22:20 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 Nov  5 22:04 IOPCCardFamily.kext
ls: /Library/PreferencePanes: No such file or directory
     {Hide = 0; Path = "/Library/PreferencePanes/WirelessDriver 
PPane.prefPane"; },
     {Hide = 0; Path = "/Library/PreferencePanes/WirelessDriver 
PPane.prefPane"; }

### wirelesscard info

     | |         |   "VersionOneInfo" = ("Lucent 
Technologies","WaveLAN/IEEE","V$
     | |           |   "VersionOneInfo" = ("Lucent 
Technologies","WaveLAN/IEEE")
     | |       +-o pccard156,2@0,0  <class IOPCCard16Device>
     | |         |   "IOName" = "pccard156,2"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::202:2dff:fe1e:5ed%en2 prefixlen 64 scopeid 0x4
         inet 192.168.1.105 netmask 0xffffff00 broadcast 192.168.1.255
         ether 00:02:2d:1e:05:ed
         media: <unknown type> (DS11 <full-duplex>) status: active
         supported media: none manual autoselect DS1 <half-duplex> DS1 
<full-duplex> DS2 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS5 
<full-duplex> DS11 <half-duplex> DS11 <full-duplex>
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::250:e4ff:fe7a:2f20%en0 prefixlen 64 scopeid 0x5
         ether 00:50:e4:7a:2f:20
         media: autoselect (none) status: inactive
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX 
<full-duplex>

### wd command line tool status

/zz - DownLoads Folder/OS X Wireless DnLds/Troubleshooting 
Info.command: WirelessConfig: command not found
logout
[Process completed]