[Wirelessdriver-support] PB G3 400mhz Lombard & Netgear and Breezenet ( orinoco Gold ) cards can't get 5.1 to install or cards to work

[Bob G. <bob...@ma...>]

The cards show up as being recognized by computer. EN1 does not show 
up. I run

sudo pico 
/systems/library/extensions/WirelessDriver.kext/contents/info.plist

in terminal and get a blank page with commands on the bottom. I have 
installed driver once and restarted. twice and restarted. etc. to no 
avail.

Here in is trouble shooting info

Any help in the simplest jargon would be appreciated

Bob

Last login: Sun Nov 10 21:46:37 on ttyp1
/Users/bobgreene/Desktop/Troubleshooting\ Info.comWelcome to Darwin!
mand; exit
[Bob-Greenes-Computer:~] bobgreene% 
/Users/bobgreene/Desktop/Troubleshooting\ Info.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.2
BuildVersion:   6C115
Darwin Bob-Greenes-Computer.local. 6.0 Darwin Kernel Version 6.0: Sat 
Jul 27 13:18:52 PDT 2002; root:xnu/xnu-344.obj~1/RELEASE_PPC  Power 
Macintosh powerpc
ppc750

### wireless driver files installed

drwxr-xr-x    3 root  wheel    102 Nov 10 21:27 WirelessDriver.kext
drwxr-xr-x    3 root  wheel    102 Jul 27 13:22 IOPCCardFamily.kext
ls: /Library/PreferencePanes: No such file or directory

### wirelesscard info

     | |             "VersionOneInfo" = ("Alvarion Ltd.","BreezeNET 
PC-DS.11b","$
     | |       +-o pccard268,1@0,0  <class IOPCCard16Device>
     | |             "IOName" = "pccard268,1"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::250:e4ff:fe25:fd40%en0 prefixlen 64 scopeid 0x4
         ether 00:50:e4:25:fd:40
         media: autoselect (none) status: inactive
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX 
<full-duplex>
ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
         inet 17.219.128.197 --> 17.219.128.2 netmask 0xff000000

### wd command line tool status

/Users/bobgreene/Desktop/Troubleshooting Info.command: WirelessConfig: 
command not found
logout
[Process completed]