Re: [Wirelessdriver-devel] Trying to get SkyLine with PCI adapter to work

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

From my limited understanding, I do not believe this will be possible until
apple includes support for PCMCIA cards via PCI into IOPCCardFamily.kext.
You can try compiling the latest version of IOPCCardFamily from Apples cvs
but I haven't seen anything in the change log to indicate that it could
work. I defer to Rob for a more authoritative answer.

Y

On 4/30/02 1:42 AM, "Otto Moerbeek" <ot...@dr...> wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> Hi,
> 
> I've been experimenting with getting my SkyLine 11Mbs with PCI adapter
> working with the wireless driver in my B&W PowerMac. So far, I've been
> able to get the card recognized by the kernel using the standard 10.1.4
> IOPCCardFamiliy driver. So that is good news. But starting the card
> either results in a mapping error, or in a kernel panic...
> 
> These are the steps I've done:
> 
> I've put an entry into the the Info.plist file of the IOPCCardFamily
> driver:
> 
> <key>PowerMac1,1</key>
> <dict>
> <key>I/O Port Ranges</key>
> <array>
> <data>
> AAAAAAAAj/8=
> </data>
>     <data>
> AACgAAAA//8=
> </data>
> </array>
> <key>Memory Ranges</key>
> <array>
> <data>
> hAAAAJ////8=
> </data>
> </array>
> </dict>
> 
> (These values are based on an educated guess, see below)
> 
> Using this condfig, my SkyLine card gets recognized (there seems to be a
> type in the Info.plist of the WirelessDriver, it lists the/a Skyline
> card as having number HFA3843x, while my card report number HFA384x),
> see below for the ioreg listings. The problem is that initializing the
> card fails. Here are the system.log entries:
> 
> Apr 28 13:49:54 power-eth mach_kernel:
> org_noncontiguous_WirelessDriver::probe(pccard156,2)
> Apr 28 13:49:54 power-eth mach_kernel:
> org_noncontiguous_WirelessDriver::probe(pccard156,2)
> Apr 28 13:49:54 power-eth mach_kernel:
> org_noncontiguous_WirelessDriver::start(pccard156,2) <1>
> Apr 28 13:49:54 power-eth mach_kernel: Ethernet(BMac): Link up at 10
> Mbps - Half Duplex
> Apr 28 13:49:54 power-eth mach_kernel: IOKernelDebugger: Debugger
> attached
> Apr 28 13:49:54 power-eth mach_kernel: IOPCCard info:
> IOPCCard16Enabler::configure using index 0x01: Vcc 3.
> 3, irq 255, io 0x0000-0x003f
> Apr 28 13:49:54 power-eth mach_kernel: Didn't make map 00000000 :
> 00000040
> Apr 28 13:49:54 power-eth mach_kernel: org_noncontiguous_WirelessDriver:
> Map Failed
> Apr 28 13:49:54 power-eth mach_kernel:
> org_noncontiguous_WirelessDriver::start(provider=0x11da400, this=0x11d
> e000) ** ABORTING! **
> Apr 28 13:49:54 power-eth mach_kernel:
> org_noncontiguous_WirelessDriver::start(pccard156,2) <2> failed
> Apr 28 13:49:54 power-eth mach_kernel:
> org_noncontiguous_WirelessDriver::start(pccard156,2) <1>
> Apr 28 13:49:54 power-eth mach_kernel: IOPCCard info:
> IOPCCard16Enabler::configure using index 0x01: Vcc 3.
> 3, irq 255, io 0x0000-0x003f
> Apr 28 13:49:54 power-eth mach_kernel: Didn't make map 00000000 :
> 00000040
> Apr 28 13:49:54 power-eth mach_kernel: org_noncontiguous_WirelessDriver:
> Map Failed
> Apr 28 13:49:54 power-eth mach_kernel:
> org_noncontiguous_WirelessDriver::start(provider=0x11da400, this=0x11f
> 6000) ** ABORTING! **
> Apr 28 13:49:54 power-eth mach_kernel:
> org_noncontiguous_WirelessDriver::start(pccard156,2) <2> failed
> 
> So it looks like the card cannot be mapped into memory. Since tha card
> is matched both by the edited HFA entry and the pccard156,2 entry, it
> gets two attempts, I guess. The irq (255) also looks suspicious to me.
> 
> Using LinuxPPC lspci -vv on the same machine (which works fine, after
> having edited the /etc/pcmcia/config.opts to extend the memory range to
> start from 0x80000000, instead of 0x90000000), I can see that the card
> gets mapped to address 0x80885000:
> 
> 
> 01:04.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus
> Controller (rev 01)
> Subsystem: SCM Microsystems: Unknown device 3000
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 16, cache line size 08
> Interrupt: pin A routed to IRQ 25
> Region 0: Memory at 80885000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=80, secondary=1c, subordinate=00, sec-latency=176
> I/O window 0: 00000000-00000003
> I/O window 1: 00000000-00000003
> BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt- PostWrite+
> 16-bit legacy interface ports at 0001
> 
> And here's the cardtl ident output:
> 
> Socket 0:
>  product info: "INTERSIL", "HFA384x/IEEE", "Version 01.02", ""
>  manfid: 0x0156, 0x0002
>  function: 6 (network)
> 
> If I adapt the memory region in Info.plist of the IOPCCardFamily driver
> to start with address 0x80000000 (value gAAAAJ////8=), I get a kernel
> panic in the IOPCCardFamily driver. With different values for the mem
> range (copied from other entries in the sme file) I also saw panics in
> the WirelessDriver, being called from the IOPCCardFamily driver.
> 
> Do you have any suggestions or hints? Like anwers to the questions:
> 
> - - What should be the memory range of the in the Info.plist of the
> PowerMac1,1 entry in the IOPCCardFamily driver?
> - - What should be the Info.plist values of the SkyLine 11mbs card? Has
> the HFA entry a typo or not?
> - - Is the interrupt value of 255 indeed wrong?
> - - What debugging strategy should I use?
> 
> 
> Thanks in advance, Otto
> 
> Below are the ioreg -l listings:
> 
>    |     |   | +-o IOPCCardBridge  <class IOPCCardBridge>
>    |     |   |   | {
>    |     |   |   |   "Bridge IO Ranges" = (0,36863,40960,65535)
>    |     |   |   |   "IOPersonalityName" = "IOPCCardFamily"
>    |     |   |   |   "Configuration Settings" = {"PowerBook"={"Memory
> Ranges"=(<90000000afffffff>),"I/O Port
> Ranges"=(<fe000000fe00ffff>)},"PowerBook1,1"={"Memory
> Ranges"=(<900000009fffffff>),"I/O Port
> Ranges"=(<fe000000fe00ffff>)},"PowerBook3,4"={"Memory
> Ranges"=(<900000009fffffff>),"I/O Port
> Ranges"=(<f2000000f2008fff>,<f200a000f200ffff>)},"PowerBook3,1"={"Memory
> Ranges"=(<900000009fffffff>),"I/O Port
> Ranges"=(<f2000000f2000fff>,<f2002000f200ffff>)},"PowerBook3,2"={"
> Memory Ranges"=(<900000009fffffff>),"I/O Port
> Ranges"=(<f2000000f2008fff>,<f200a000f200ffff>)},"PowerBook3,3"={"Memory
> Ranges"=(<900000009fffffff>),"I/O Port
> Ranges"=(<f2000000f2008fff>,<f200a000f200ffff>)},"PowerMac1,1"={"Memory
> Ranges"=(<840000009fffffff>),"I/O Port
> Ranges"=(<0000000000008fff>,<0000a0000000ffff>)
> },"X86PC"={"Memory
> Ranges"=(<000c0000000fffff>,<a0000000a0ffffff>,<6000000060ffffff>),"I/O
> Port Ranges"=(<00000100000004ff>,<00000800000008ff>,<00000c0000000cff>)}}
>    |     |   |   |   "Debug Settings" = {"Card Services"=3,"Card
> Bus"=3,"Driver Services"=4,"i82365"=2}
>    |     |   |   |   "Bridge Memory Ranges" = (-2080374784,-1610612737)
>    |     |   |   |   "IOProviderClass" = "IOPCIDevice"
>    |     |   |   |   "CFBundleIdentifier" =
> "com.apple.iokit.IOPCCardFamily"
>    |     |   |   |   "Power Management private data" = "{ this object =
> 01127600, interested driver = 01127600, driverDesire = 2, deviceDesire =
> 0, ourDesire
> dPowerState = 2, previousRequest = 2 }"
>    |     |   |   |   "IOKitDebug" = 0
>    |     |   |   |   "IOMatchCategory" = "IODefaultMatchCategory"
>    |     |   |   |   "IOPCIClassMatch" = "0x06070000"
>    |     |   |   |   "Power Management protected data" = "
> { theNumberOfPowerStates = 3, version 1, power state 0 =
> { capabilityFlags 00000000, outputPowerCha
> racter 00000000, inputPowerRequirement 00000000, staticPower 0,
> unbudgetedPower 0, powerToAttain 0, timeToAttain 0, settleUpTime 0,
> timeToLower 0, settleDownT
> ime 0, powerDomainBudget 0 }, power state 1 = { capabilityFlags
> 00000000, outputPowerCharacter 00000400, inputPowerRequirement 00000400,
> staticPower 0, unbudg
> etedPower 0, powerToAttain 0, timeToAttain 0, settleUpTime 0,
> timeToLower 0, settleDownTime 0, powerDomainBudget 0 }, power state 2 =
> { capabilityFlags 000000
> 02, outputPowerCharacter 00000002, inputPowerRequirement 00000002,
> staticPower 0, unbudgetedPower 0, powerToAttain 0, timeToAttain 0,
> settleUpTime 0, timeToLo
> wer 0, settleDownTime 0, powerDomainBudget 0 }, aggressiveness = 0,
> myCurrentState = 2, parentsCurrentPowerFlags = 00000002, maxCapability =
> 2 }"
>    |     |   |   |   "IOClass" = "IOPCCardBridge"
>    |     |   |   |   "IOProbeScore" = -100
>    |     |   |   |   "ParentKey" =
> "KEXTBundle?com.apple.iokit.IOPCCardFamily"
>    |     |   |   | }
>    |     |   |   |
>    |     |   |   +-o pccard156,2@0,0  <class IOPCCard16Device>
>    |     |   |       {
>    |     |   |         "VersionOneInfo" =
> ("INTERSIL","HFA384x/IEEE","Version 01.02","")
>    |     |   |         "VendorID" = 342
>    |     |   |         "DeviceID" = 2
>    |     |   |         "IOInterruptSpecifiers" = (<00000000>)
>    |     |   |         "Power Management private data" = "{ this
> object = 011ebf00, interested driver = 011ebf00, driverDesire = 0,
> deviceDesire = 0, ourDesi
> redPowerState = 2, previousRequest = 2 }"
>    |     |   |         "IODeviceMemory" = ("IOGeneralMemoryDescriptor
> is not serializable")
>    |     |   |         "FunctionExtension" =
> (<0107>,<0240420f00>,<0280841e00>,<0260ec5300>,<02c0d8a700>,<0307>,<04060000c5
> 099172>
> ,<0501>)
>    |     |   |         "Power Management protected data" = "
> { theNumberOfPowerStates = 3, version 1, power state 0 =
> { capabilityFlags 00000000, outputPowerC
> haracter 00000000, inputPowerRequirement 00000000, staticPower 0,
> unbudgetedPower 0, powerToAttain 0, timeToAttain 0, settleUpTime 0,
> timeToLower 0, settleDow
> nTime 0, powerDomainBudget 0 }, power state 1 = { capabilityFlags
> 00000000, outputPowerCharacter 00000400, inputPowerRequirement 00000400,
> staticPower 0, unbu
> dgetedPower 0, powerToAttain 0, timeToAttain 0, settleUpTime 0,
> timeToLower 0, settleDownTime 0, powerDomainBudget 0 }, power state 2 =
> { capabilityFlags 0000
> 0000, outputPowerCharacter 00000002, inputPowerRequirement 00000002,
> staticPower 0, unbudgetedPower 0, powerToAttain 0, timeToAttain 0,
> settleUpTime 0, timeTo
> Lower 0, settleDownTime 0, powerDomainBudget 0 }, aggressiveness = 0,
> myCurrentState = 2, parentsCurrentPowerFlags = 00000002, maxCapability =
> 2 }"
>    |     |   |         "FunctionName" = "Network Adapter"
>    |     |   |         "FunctionNumber" = 0
>    |     |   |         "IOInterruptControllers" =
> ("IOPCCardInterruptController00010400")
>    |     |   |         "FunctionID" = 6
>    |     |   |         "SocketNumber" = 0
>    |     |   |         "IOName" = "pccard156,2"
>    |     |   |       }
> 
> 
> - --
> Otto Moerbeek       ot...@dr...
> Public Key fingerprint: 13F7 EB00 14D7 7810 88DA  CDDE DBF1 B5AB 2FB7
> A5A3
> 
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.0.6 (Darwin)
> Comment: For info see http://www.gnupg.org
> 
> iD8DBQE8zjzI2/G1qy+3paMRAiwFAKCKYkImt+aXlDxPRVk0AQFEi6AD+wCgsGAm
> Q1a6y3DZ95LG4EqqHHy+r8I=
> =MoEo
> -----END PGP SIGNATURE-----
> 
> 
> _______________________________________________
> Wirelessdriver-devel mailing list
> Wir...@li...
> https://lists.sourceforge.net/lists/listinfo/wirelessdriver-devel
> 