Re: [Wirelessdriver-support] en1 Inactive - Beta 5.1 after 10.2 Upgrade

[Joe C. <li...@ch...>]

On Sunday, November 3, 2002, at 09:41  PM, Ken Dow wrote:

> The en1 connection shows up in my existing network configurations but 
> it's greyed out. New network configurations I create do not include 
> en1 at all.

I had this trouble, and I solved it this way:

- Power off the card and remove it.
- Go to Network Port Configurations in Network.
- Delete the greyed out en1.
- Quit and restart system preferences, then open Network again.
- Now insert the card again.

When I did this, a new network configuration was found (en1 again), and 
all was happy happy joy joy.

This assumes, of course, that you've done the double-install thing that 
you have to do to get the driver working in the first place.

Joe
--
Joe Chellman   email - bus...@ch...
drummer          web - http://www.chellman.org/
webdesigner      pgp - http://www.chellman.org/pgp_key.txt