[Wirelessdriver-support] Can't get my Orinoco Silver card to work

[Zachary R. <za...@cs...>]

Hi,

I'm probably missing something obvious, but I installed the latest
released version of the wireless driver and am using an Orinoco Silver
card, but have not been successful at getting the computer to
recognize the card.  Neither light of the card lights up nor does the
ifconfig report a recognized network interface for the card.  I have
an airport card at en1, so I expected to see an en2 in the network
preference tool.  Unfortunately, it does not not appear (I have just
the standard modem, builtin, and airport options).  Below, I have
attached the results of running the troubleshooting script.  I am
trying to connect on an open network.  Any help you can provide would
be appreciated.  Thanks.


                Zack



Last login: Sun Nov  3 14:21:46 on ttyp2
/Users/zack/Desktop/Troubleshooting\ Info.1.commanWelcome to Darwin!
d; exit
hume:~ > /Users/zack/Desktop/Troubleshooting\ Info.1.command; exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.1
BuildVersion:   6D52
Darwin hume.local. 6.1 Darwin Kernel Version 6.1: Fri Sep  6 23:24:34
PDT 2002; root:xnu/xnu-344.2.obj~2/RELEASE_PPC  Power Macintosh
powerpc
ppc7450

### wireless driver files installed

drwxr-xr-x    3 root  wheel   102 Jul 27 16:22 IOPCCardFamily.kext
ls: /Library/PreferencePanes: No such file or directory
2002-11-03 14:29:44.068 defaults[725] 
The domain/default pair of (loginwindow,
AutoLaunchedApplicationDictionary) does not exist

### wirelesscard info

    | |             "VersionOneInfo" = ("Lucent
                    Technologies","WaveLAN/IEEE","Version 01.01","")
    | |       +-o pccard156,2@0,0  <class IOPCCard16Device>
    | |             "IOName" = "pccard156,2"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128 
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
        inet 127.0.0.1 netmask 0xff000000 
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::203:93ff:fed6:bc8%en0 prefixlen 64 scopeid 0x4 
        ether 00:03:93:d6:0b:c8 
        media: autoselect (none) status: inactive
        supported media: none autoselect 10baseT/UTP <half-duplex>
        10baseT/UTP <half-duplex,hw-loopback> 10baseT/UTP
        <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX
        <half-duplex> 100baseTX <half-duplex,hw-loopback> 100baseTX
        <full-duplex> 100baseTX <full-duplex,hw-loopback> 1000baseTX
        <full-duplex> 1000baseTX <full-duplex,hw-loopback> 1000baseTX
        <full-duplex,flow-control> 1000baseTX
        <full-duplex,flow-control,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::230:65ff:fe07:2ab5%en1 prefixlen 64 scopeid 0x5 
        inet 192.168.240.187 netmask 0xffffff00 broadcast
        192.168.240.255
        ether 00:30:65:07:2a:b5 
        media: autoselect status: active
        supported media: autoselect

### wd command line tool status

/Users/zack/Desktop/Troubleshooting Info.1.command: WirelessConfig:
command not found
logout
[Process completed]